LCD and Touch Screen for Galaxy A7 (2016) A710

• Whether your outer glass or touch screen is broken, this replacement part is the right one. Nowadays, the touch screen is not sold separately because the operation to detach the LCD from the touch screen requires specific and highly expensive machinery. Besides, there would be a risk of breaking the LCD while removing it.

• We recommend the complete replacement due to the low cost of the full screen and the safety and ease of installation. This ensures that with a quick operation, you can have your Samsung phone working again.

• In addition, we include a free screwdriver kit and tools so you can perform the repair with professional material.

• Also, this product includes the adhesives needed to attach the screen to the phone. So if you buy this product, you won't need extra adhesives.

Thinking of installing it yourself at home? Read these installation tips
• Tip 1: Perform the test before completing the installation
When testing, do not remove the protective films that come with the product to ensure it does not get scratched or dusty. Pay attention to the problem of static electricity, it is very important. These parts are extremely sensitive.
Before starting the repair, make sure to use an ESD band (electro static discharge band), you can find an ESD band at iLevante or any electronics store. This band will prevent static electricity from damaging any electronic components.
Some parts of the screen are really sharp, be careful with them.
• Tip 2: Simulated tests
Screen replacement is a delicate process, do it calmly and patiently. We suggest that you perform a test before assembling the entire phone. Simply when you have it disassembled, place the part and perform the test. Sometimes a bad connection can cause it not to work properly. That's why we advise you to do a test before closing the device again.
• Tip 3: Be careful with flex cables
Make sure not to excessively bend the flex cables (the flex cable is that flexible piece that carries the connector. If you bend it beyond 90 degrees it is very likely that it will stop working properly. Simply handle it with care and you should not have any problems.