Repair parts Samsung Galaxy S25 FE
Receive it on tuesday 27 de october
In this category, you’ll find spare parts for the Samsung Galaxy S25 FE: complete screen, rear cover with camera frame, camera modules, charging port, flex cables and small components such as the loudspeaker or buttons. They’re suitable both for individuals repairing their own phone and for repair shops looking for clearly labelled parts. The S25 FE is thinner and lighter than the S24 FE and has a different body, so check the model before placing your order.
SM-S731B vs SM-S721B: how to check that your phone is a Samsung Galaxy S25 FE
The European version has the code SM-S731B, while the dual-SIM variant is listed as SM-S731B/DS. All S25 FE models share the SM-S731 root; the following letters indicate the region or configuration. To check, go to Settings, open About phone and look at the Model number field.
The most common mistake is confusing it with the Galaxy S24 FE (SM-S721B). Both have a 6,7-inch screen and look very similar, but the S25 FE is 7,4 mm thick compared with 8 mm for the S24 FE, is slightly narrower and has thinner screen bezels. This means the screen and rear cover are not interchangeable, even if they look like the same part at first glance. If your phone’s code starts with SM-S721, this isn’t the right category for you.
Available quality options for the Samsung Galaxy S25 FE and when to choose each one
What the Original S25 FE screen offers
The phone comes with a 6,7-inch Dynamic AMOLED 2X panel with FHD+ resolution (1080 x 2340), a refresh rate of up to 120 Hz and Gorilla Glass Victus+. The fingerprint reader is under the panel, so the screen is also part of the unlocking system. The Original complete screen for Samsung Galaxy S25 FE is the quality we offer for this model: it’s the part made for the phone, with identical panel technology.
The glass cannot be replaced separately: the touch glass and panel form a single unit. Samsung supplies its service network with versions with and without a central frame, so check the product details to see whether the part includes a frame, as this affects the installation process. After fitting it, register your fingerprints again. If the panel works normally and you only need to replace the connection, the Premium-quality LCD flex cable compatible with Samsung Galaxy S25 FE is a more affordable alternative.
Four rear cover colours, with the camera frame already included
The rear cover is made of glass and is attached to the chassis with adhesive around the entire perimeter, with no clips, so it can be removed by applying heat. Replacing it is a moderately difficult repair and requires the adhesive residue to be cleaned thoroughly before fitting the new part.
The complete rear cover with camera frame for Galaxy S25 FE is OEM quality and is available in these colours:
- Light Blue, corresponding to the Icyblue finish.
- Dark Blue, corresponding to the Navy finish.
- White, corresponding to the White finish.
- Black, corresponding to the Jetblack finish.
As the camera frame is already included, you don’t need to salvage it from the broken cover. If only the glass covering the lenses is damaged, the Original rear camera lens for S25 FE solves the problem without replacing the cover. Bear in mind that once the phone has been opened, its factory IP68 water resistance cannot be guaranteed, even if new adhesive is applied.
When to order an individual camera and when to order the complete set
The S25 FE has a 50 MP main camera with optical image stabilisation, an 8 MP telephoto lens with 3x optical zoom and a 12 MP ultra-wide camera. If only one module has failed, the most practical option is to order the Original 50 MP rear main camera or the Original 8 MP telephoto camera for Galaxy S25 FE separately. The Original complete rear camera set is more suitable if the impact has damaged several modules or a repair shop chooses to replace the whole assembly at once; check the product details to see which modules are included.
Charging port, flex cables and small components: what’s different inside the Samsung Galaxy S25 FE
The USB-C 3.2 connector is mounted on a secondary board, separate from the mainboard, and accessing it is easier than on the S24 FE. The OEM USB-C charging port for Samsung S25 FE lets you resolve charging issues without handling the mainboard. Before buying, check the product details to see whether it’s the complete board or just the connector.
For other faults, you’ll find Original-quality spare parts: the Original power and volume button, the earpiece flex cable for Galaxy S25 FE and the Original antenna flex cable for S25 FE, useful when reception fails after an impact or previous repair. The range is rounded off by the main loudspeaker for Samsung Galaxy S25 FE, which can be replaced without removing the screen.
Frequently asked questions from repair shops and Galaxy S25 FE users
Can I fit a Galaxy S24 FE screen in the S25 FE?
No. Although both have a 6,7-inch screen, the S25 FE has different dimensions and narrower bezels, so the part won’t fit. Make sure your code starts with SM-S731 before placing your order.
Are the parts suitable for both the SM-S731B and SM-S731B/DS?
Yes, the spare parts in this category are listed for both codes. The /DS suffix simply indicates that the phone supports dual SIM.
Do I need to set up my fingerprint again after replacing the screen?
Yes. The sensor is under the panel, so after replacing it, we recommend deleting the stored fingerprints and registering them again in the security settings.
Which rear cover colour is right for my phone?
Samsung sells the S25 FE in Icyblue, Navy, White and Jetblack. In our catalogue, these correspond to Light Blue, Dark Blue, White and Black.
