Service Pack outer screen for Samsung Z Flip3

📱 Original small Service Pack outer screen for Samsung Galaxy Z Flip3

When folded, the Samsung Galaxy Z Flip3 (SM-F711B) continues to work thanks to its outer screen. If yours is cracked, stays black or no longer responds to touch, this original small Service Pack outer screen in black (Phantom Black) will get it working like new again. It is the same assembly Samsung fits at the factory, with supplier part number GH97-26773A, so it fits, looks and responds just like the original.

🔎 What is an original Service Pack screen?

Service Pack is how Samsung supplies its original parts to authorised repair centres. In other words, this is neither a copy nor a screen salvaged from another phone: it is a new part manufactured by Samsung for the Galaxy Z Flip3, with the same colours, brightness and touch sensitivity as the screen fitted to the phone at the factory. It comes pre-assembled in its frame, allowing it to fit precisely into the upper half of the device.

✨ Galaxy Z Flip3 outer screen specifications

With the Z Flip3, Samsung made this screen much larger and more practical than the one on the first Z Flip, which measured just 1.05 inches. Here are the specifications of this replacement part:

• 📐 Size: 1.9 inches (Cover Screen)
• 🌈 Technology: Super AMOLED, with deep blacks and vivid colours
• 🔢 Resolution: 260 x 512 pixels, around 302 ppi
• ☀️ Brightness: up to around 935 nits in High Brightness Mode
• 👆 Touch: capacitive multi-touch
• ⚫ Colour: black (Phantom Black), matching the original housing
• 🏷️ Quality: original Service Pack, manufactured by Samsung
• 🔗 Compatible model: Samsung Galaxy Z Flip3 5G, SM-F711B
• 🧾 Part number: GH97-26773A

💡 What the Samsung Galaxy Z Flip3 outer screen is used for

This small screen is one you use every day, even if you hardly notice it. You can check the time and notifications, answer calls, control your music, check widgets such as the weather or step count, pay with Samsung Pay and, above all, use it as a viewfinder for taking selfies with the rear camera without opening the phone. If it stops working, the Z Flip3 loses much of what makes it special, and you have to open it for everything.

⚠️ When to replace your Galaxy Z Flip3 outer screen

Because it is on the outside, this screen takes the impact when the phone is dropped while closed, carried in a pocket with keys or placed on a hard surface. These are the most common situations in which you may need a replacement:

• 💥 Broken or cracked glass after a drop
• ⬛ The screen will not turn on or stays black even though the phone works
• 👆 The touch screen is unresponsive, registers ghost touches or fails in certain areas
• 🌫️ Spots, lines, dead pixels or areas with unusual colours
• 🔆 Flickering or brightness that changes irregularly
• 💧 Water damage affecting only the outer screen

🩺 How to tell if you need to replace your Z Flip3 small outer screen

Before ordering the part, it is worth ruling out a software issue. Restart the phone, check that you have the latest version of One UI, make sure it is enabled under Settings > Cover screen and, if you use a third-party launcher or app for the outer screen, switch back to Samsung's. You can also open Samsung's diagnostic menu by dialling *#0*# to test the touch screen and colours. If the screen still stays black, the touch screen does not respond or the glass is cracked after these checks, the part is faulty and the outer screen needs replacing.

🔧 How to replace the outer screen on the Samsung Galaxy Z Flip3

On the Galaxy Z Flip3, the outer screen is integrated into the rear cover of the upper half, next to the cameras. To replace it, the area is gently heated to soften the adhesive, the damaged part is carefully removed and the outer screen flex connector is disconnected; it connects to the motherboard beneath a small protective plate. The new original Service Pack screen is then connected and tested to make sure it turns on and responds correctly to touch. Finally, new adhesive is applied to secure it properly, with no gaps. As the replacement comes pre-assembled, it fits precisely and has a factory-quality finish.

📲 All about the Samsung Galaxy Z Flip3 5G (SM-F711B)

The Galaxy Z Flip3 was released in August 2021 and became one of the most successful clamshell foldable phones. It features a 6.7-inch 120 Hz Dynamic AMOLED 2X inner screen, a Snapdragon 888 chip, 5G connectivity, an Armor Aluminum frame, Gorilla Glass Victus, IPX8 water resistance and a 3,300 mAh battery. The SM-F711B is the international version sold in Europe, and this outer screen is designed specifically for it.

✅ Why buy your Galaxy Z Flip3 outer screen from iLevante?

• 🏅 Original Samsung part in Service Pack format
• 🎯 Exact compatibility with the Galaxy Z Flip3 SM-F711B
• ⚫ Phantom Black finish, matching the original
• 🚚 Fast delivery and carefully protected packaging
• 🤝 iLevante's specialist range of mobile phone and tablet parts

Enjoy notifications, selfies with the main camera and everything else you can do with the phone closed. With this original small Service Pack outer screen, your Samsung Galaxy Z Flip3 will work like new again. 🚀