Repair parts Samsung Galaxy A06 4G
Receive it on tomorrow friday 23 october
In this section, you’ll find replacement parts for the Samsung Galaxy A06 4G, the basic 2024 model with a MediaTek Helio G85 chip and a 6.7-inch screen: a complete screen, two 5000 mAh batteries, the rear depth camera and the USB-C charging connector. They’re suitable for both people repairing their own phone and workshops that work on the Galaxy A range every day. Before buying, check that your device is the 4G version: it shares its name and design with the Galaxy A06 5G, and some parts aren’t compatible between the two.
SM-A065F or SM-A066B: how to identify whether your Samsung Galaxy A06 is the 4G model
The Galaxy A06 4G can be identified by four codes: SM-A065F and SM-A065F/DS, the international version Samsung sells in markets such as Africa, Asia and Oceania, and SM-A065M and SM-A065M/DS, the variant intended for Latin America, found in countries such as Mexico, Colombia and Brazil. The /DS suffix indicates dual-SIM models. Teardown guides treat all four codes as the same device, so the parts in this category fit all of them.
To check, go to Settings > About phone, where the model number is shown alongside the IMEI and serial number. If the phone won’t start, the code is also printed on the original box.
If the code starts with SM-A066, you have the Galaxy A06 5G. It looks very similar on the outside, but has a Dimensity 6300 processor and a 90 Hz screen, compared with 60 Hz on the 4G model. This difference in the display is why the screen for one isn’t compatible with the other.
Which part fits your Samsung Galaxy A06 4G, and what quality is available
The 6.7-inch PLS LCD panel and its Premium replacement
The A06 4G comes with a 6.7-inch PLS LCD panel with HD+ resolution (720 x 1600) and a 60 Hz refresh rate. It has no under-display fingerprint reader or high refresh rates tied to the panel, so a compatible replacement doesn’t have any such features to retain or lose. What you should consider is the image and touch quality.
The compatible complete screen for Samsung Galaxy A06 4G is Premium quality: a compatible LCD panel at a lower price than Samsung’s official replacement. Maximum brightness and colour tone vary depending on the panel manufacturer, so they may not exactly match those of the screen originally fitted to your phone.
A practical note: on this model, the screen is integrated into the mid-frame. If the replacement comes with a frame, the repair involves transferring the board, battery and remaining components to the new frame. If it doesn’t, you’ll need to detach the panel from the original frame. Check the product listing to see which version you’ll receive before planning the repair.
Two 5000 mAh battery options sharing the HQ-7160SS code
The original A06 4G battery has a typical capacity of 5000 mAh, supports 25 W charging and is identified by the code HQ-7160SS. Some labels also show a figure of 4850 mAh, which refers to the minimum rated capacity and doesn’t indicate a different part.
We offer two Premium quality options: the 5000 mAh HQ-7160SS battery for Galaxy A06 and the compatible HQ-7160SS battery listed for the A06 5G. Both share the same code, which the replacement parts market uses for both the A065F and A066B. This makes it practical for a workshop to stock a single battery reference for both models.
Original quality components: 2MP depth camera and USB-C connector
The A06 4G’s rear camera setup consists of a 50MP f/1.8 main sensor and a 2MP depth sensor f/2.4. The original 2MP rear depth camera replaces only this secondary sensor, not the 50MP main one, so check that the faulty module is the smaller one.
The original USB-C charging port for Galaxy A06 is also Original quality. On this model, the connector is located on a secondary board at the bottom of the phone, so check the product listing to see whether you’ll receive the complete board or just the connector, depending on whether you have soldering equipment.
Side-button fingerprint reader and integrated frame: features of the Galaxy A06 4G
The A06 4G’s fingerprint reader is built into the side power button and connects to the board via its own flex cable, independently of the screen. This means that replacing the screen doesn’t affect fingerprint unlocking, a common question on forums about this model. If the fingerprint reader stops working after a repair, the first thing to check is the side flex cable, which sits close to the frame during disassembly.
Since the screen and frame form a single unit, any screen repair also requires you to handle the battery and secondary board. If the battery life has already declined, many workshops find it worthwhile to replace both parts during the same repair.
Frequently asked questions about repairing a Samsung Galaxy A06 4G
Can I fit an A06 5G screen to my A06 4G?
No. The A06 5G (SM-A066) uses a 90 Hz panel with its own part reference, while the 4G (SM-A065) has a 60 Hz panel. Even if the external dimensions are similar, always choose a screen based on the model code.
What’s the difference between the two batteries in this category?
Both are 5000 mAh, Premium quality and use the code HQ-7160SS. One is listed for the A06 and the other for the A06 5G, as both models share the same battery reference.
My phone is an SM-A065M. Are these parts compatible?
Yes. The SM-A065M is the Latin American variant of the same Galaxy A06 4G and uses the same components as the SM-A065F. The difference is the market it’s sold in, not the internal parts.
Will the 2MP camera fix blurry photos from the main camera?
Not necessarily. The 2MP sensor is the depth camera, which works alongside the 50MP main camera. If the fault is in the 50MP module, this part won’t replace it.
