Repair parts Samsung Galaxy Z Fold 7

In this category, you’ll find parts for the Samsung Galaxy Z Fold 7: outer screen, dual-cell battery, rear and front cameras, charging port, wireless charging chip and various flex cables and small components. They’re suitable both for individuals repairing their own foldable phone and for repair shops that work with Samsung every day. It was the thinnest Fold the brand had launched at the time, measuring 8,9 mm thick when folded and weighing 215 g. Its extremely compact design affects both the choice of part and the replacement process.

SM-F966 codes to distinguish your Samsung Galaxy Z Fold 7 from the Fold6

All versions of the Galaxy Z Fold 7 have the SM-F966 prefix, followed by a letter identifying the market. The European variant is the SM-F966B (also listed as SM-F966B/DS), while the SM-F966U and SM-F966U1 are sold in the United States. If your phone’s code doesn’t begin with SM-F966, it isn’t this model.

To check, go to Settings > About phone, where you’ll find the model number, or dial *#06# in the phone app. This is more reliable than going by the phone’s appearance, as the Fold7 can easily be mistaken for its predecessor at a glance.

The most common mix-up is with the Galaxy Z Fold6, whose code is SM-F956. Their parts are not interchangeable: the Fold6 is 12,1 mm thick when folded and has a 6,3-inch outer screen, compared with the Fold7’s 6,5-inch screen. Another difference can help you identify it: Samsung removed the digitiser layer from the inner panel, so the Fold7 is not compatible with the S Pen. If your phone worked with the S Pen, it isn’t a Fold7.

Parts available for the Samsung Galaxy Z Fold 7 and how to choose between them

The original 6,5-inch outer panel

The original outer screen for Samsung Z Fold 7 is the cover panel, which you use when the phone is folded. It comes with a 6,5-inch Dynamic AMOLED 2X display, a resolution of 2520 x 1080 and an adaptive refresh rate of up to 120 Hz. As it is Original quality, it has the same technology, resolution and refresh rate as the factory-fitted screen.

It does not replace the 8-inch inner foldable screen, which is a separate part. The Fold7’s fingerprint reader is located in the side button, not under the screen, so fingerprint unlocking does not depend on this panel. During iFixit’s teardown, the outer screen was held in place with very strong adhesive, which only loosened with considerable heat and a suction cup. We recommend having new adhesive to hand and some previous experience repairing foldable phones.

Two cells with a total capacity of 4400 mAh

The Fold7’s total capacity of 4400 mAh is split between two separate cells, one in each half of the chassis. The 4400 mAh battery compatible with Samsung Galaxy Z Fold 7 is Premium quality, and its name includes both cell references, EB-BF966ABE and EB-BF967ABE. If you replace only one cell, the other will retain its existing wear. It’s therefore worth checking the product details to see what’s included before placing your order.

The cells are secured with pull tabs which, according to the teardown, break easily. They’re also so thin that they bend if too much leverage is applied, and a bent cell can catch fire. As for the software, there have been cases with other Galaxy models where Samsung Members diagnostics continued to report the battery as degraded after a replacement outside the official service network. If you’re returning the phone to a customer, it’s worth making them aware.

12 and 10 MP cameras and lens frames in different colours

The cameras listed are Original quality and are sold separately: the 12 MP rear ultra-wide camera, the 10 MP rear telephoto camera, which provides 3x optical zoom in the phone, and the 10 MP front camera for Z Fold7. The Fold7 has two 10 MP selfie cameras, one on the outer screen and one on the inner screen, so check the product details to make sure you choose the one you need.

If only the glass is broken, the rear camera lens and frame for Z Fold 7 lets you avoid replacing the sensors. It’s available in Blue Shadow, Mint, Shadow Grey and Titanium Jet Black; choose the colour of your back cover so the frame matches the rest.

Charging, flex cables and buttons

The original charging port for Z Fold7 and S25 Edge is listed as compatible with both models, which is convenient for repair shops that work on both. The Fold7 supports wireless charging using the Qi standard, and the original wireless charging chip is the part to check if wired charging works but wireless charging doesn’t.

The range also includes the Z Fold 7 antenna flex cable, the original gyroscope flex cable and the original volume button, the latter available in Blue Shadow, Shadow Grey and Titanium Jet Black. They’re small parts, but with such a compact phone, it’s worth ordering them with the main repair to avoid opening it twice.

What the Galaxy Z Fold 7’s 8,9 mm chassis means when replacing parts

iFixit gave the Fold7 a 3 out of 10 for repairability. It found adhesive on the back cover, the outer screen and even the SIM tray, and Samsung provided neither manuals nor replacement parts for this model during the teardown. For an individual, almost any repair requires heat, suction cups and patience. Repair shops should allow for this additional time and the sealing adhesives when preparing a quote.

The device comes from the factory with an IP48 rating. Once it’s been opened, that protection depends on the seal applied when closing it again, so don’t assume it will remain protected after repair. The second cell is also connected by a flex cable that runs from one half to the other, and accessing it requires considerable disassembly. Keep this in mind when estimating the time needed for a battery replacement.

Frequently asked questions when buying replacement parts for the Samsung Galaxy Z Fold 7

Will Fold6 parts fit the Fold7?

No. The thickness and outer screen dimensions differ, so the screens and housing parts won’t fit. Check that your code begins with SM-F966 before placing your order.

Does the outer screen include the inner foldable screen?

No. The outer screen is only the 6,5-inch cover panel. The 8-inch foldable screen is a separate component and is not included with this replacement part.

Do both battery cells need to be replaced?

The 4400 mAh capacity is the combined total of both cells. If you replace only one, the other will retain its existing wear, so check the product details to see what’s included and decide based on the phone’s condition.

Which part do I need if only the camera glass is broken?

The rear camera lens and frame are sufficient, so there’s no need to touch the sensors. Choose the colour that matches your back cover from the four available options.