Repair parts Samsung Galaxy A07
Receive it on tomorrow thursday 05 november
Receive it on tomorrow thursday 05 november
Receive it on tomorrow thursday 05 november
This section lists parts for the Samsung Galaxy A07 5G, sold under the codes SM-A076B and SM-A076B/DS. It is Samsung’s entry-level model, unveiled in January 2026, with a 6.7-inch LCD screen running at 120 Hz and a fingerprint sensor built into the side button. These parts are suitable both for anyone repairing their own device and for repair shops looking for the exact part without confusing it with the 4G variant, which shares the same product name.
SM-A076B or SM-A075: how to tell the Samsung Galaxy A07 5G apart from the 4G version
Samsung sells two different phones under the Galaxy A07 name, and their components should not be mixed. The Galaxy A07 5G uses codes beginning with SM-A076, while the Galaxy A07 4G, released in August 2025, is identified as SM-A075F, SM-A075M or SM-A075B. The /DS suffix simply indicates that the device supports dual SIM.
To check, go to Settings > About phone: the model number is listed there along with the IMEI and serial number. If the phone will not start, look for the code on the original box or purchase receipt, as the two versions look quite similar and the name on the home screen is not enough to identify them.
The hardware differences explain why the parts are not interchangeable. The 5G model is 8.2 mm thick, compared with 7.6 mm for the 4G, weighs 199 g compared with 184 g, and features a Dimensity 6300 processor instead of the Helio G99. Its screen reaches 120 Hz, while the 4G screen is limited to 90 Hz, and although both have the same diagonal and resolution, the A07 4G display is not compatible with the A07 5G, or vice versa.
In India, the same phone is also sold as the Galaxy M17e 5G (SM-M076B) and Galaxy F70e 5G, with the same internal development name. If you have one of these devices, check the code before placing your order, as our parts are listed for the SM-A076B.
Parts available for the Samsung Galaxy A07 5G and how they differ
| Part | Quality | What it replaces | What to check first |
|---|---|---|---|
| Screen assembly | Premium | Glass, LCD panel and touchscreen in a single part | Check that the code matches SM-A076B or SM-A076B/DS |
| Fingerprint sensor flex cable | Original | Fingerprint sensor in the power button | Check that the phone is the 5G version, not the A07 4G |
Premium quality compared with the original LCD panel
Out of the box, the Galaxy A07 5G features a 6.7-inch PLS LCD panel with HD+ resolution (720 x 1600), a waterdrop notch for the front camera and a peak brightness of around 800 nits. As the fingerprint reader is not under the glass, replacing the screen does not affect biometric unlocking: that function is handled by the side button.
The Premium compatible screen assembly for Samsung Galaxy A07 5G is a compatible-quality replacement supplied as a display and touchscreen assembly. This lets you replace the glass and panel in a single repair, which is practical because they are bonded together in this model. It is usually cheaper than a genuine Samsung service replacement, making it a good choice if you want to restore the picture and touchscreen at a reasonable cost.
As for 120 Hz: the refresh rate is controlled by the system, although the final result depends on the panel fitted. If a high refresh rate is essential to you, check the product listing specifications before buying. In a repair shop, it is worth checking the brightness, touchscreen response around the edges and 120 Hz mode before closing the device.
The fingerprint reader is located in the power button
On the Galaxy A07 5G, the fingerprint sensor is built into the power button on the right-hand side. This means the two repairs are completely separate: replacing the screen does not affect the reader, and the reader can be replaced using its own flex cable without changing the display.
The original fingerprint sensor flex cable for Samsung A07 5G is Original quality, meaning it is a component from the manufacturer itself. It is listed for the 5G version, so do not fit it to an A07 4G (SM-A075) without first checking compatibility. After installation, it is advisable to delete the saved fingerprints and register them again in the security settings, as they were set up with the previous sensor.
What you need to know about the Galaxy A07 5G before opening it
The phone comes with IP54 certification for dust and splash resistance. This protection depends on the original seal, so the same level of water resistance cannot be guaranteed after the phone has been opened, regardless of the quality of the replacement part. If this matters to the customer, it is worth mentioning before carrying out the repair.
The back and frame are made of plastic, while the front is glass, making the screen the area most exposed to knocks. As the 4G and 5G displays are not interchangeable, repair shops that work on both versions will find it most practical to label stock by model code (A075 or A076) rather than by product name.
Frequently asked questions from Galaxy A07 5G repair shops and users
Can I fit a Galaxy A07 4G screen to my A07 5G?
No. Although they have the same size and resolution, they are different parts: the 4G runs at 90 Hz and the 5G at 120 Hz, and the body thickness also differs. Always check that your code begins with SM-A076.
Will I lose fingerprint unlocking when I replace the screen?
No, because on this model the reader is not under the glass but in the power button. The display and fingerprint sensor are separate components.
How can I find out whether my Galaxy A07 is the 5G version?
Check the model number under Settings > About phone. If it begins with SM-A076, it is the 5G version; if it begins with SM-A075, it is the 4G version, which requires different parts.
Are these parts suitable for the Galaxy M17e 5G?
The M17e 5G (SM-M076B) is a rebadged version of the A07 5G for the Indian market and shares its hardware. However, our parts are listed for the SM-A076B, so check with us using the exact code before placing your order.
