Repair parts Samsung Galaxy Z Flip 8

In this section, you’ll find original parts for Samsung Galaxy Z Flip 8, the clamshell foldable that Samsung unveiled in July 2026, with a 6.9-inch inner screen and a 4.1-inch external FlexWindow. The catalogue currently includes two essential components: the complete screen and the rear main camera, both in Original quality. They’re suitable both for individuals who want to repair their own phone and for repair shops looking for manufacturer parts for a newly launched model.

SM-F776B or SM-F766B: the difference between Galaxy Z Flip 8 and Flip 7

The Galaxy Z Flip 8 is identified by the SM-F776 series of codes. The European version is SM-F776B, with the dual-SIM variant SM-F776B/DS, while in the United States it’s sold as SM-F776U and SM-F776U1. To check the code on your device, go to Settings > About phone and look at the Model number field, which always starts with SM-.

This check is more important than usual because the Flip 8 is almost indistinguishable from its predecessor on the outside. The Galaxy Z Flip 7 has the code SM-F766B, shares the same screen sizes (6.9 and 4.1 inches) and the same camera resolutions, so the two are easily confused at a glance. The physical differences are minimal: the Flip 8 weighs 180 g compared with 188 g and is slightly thinner when folded, at 13.1 mm compared with 13.7 mm.

It’s also worth making sure you don’t confuse it with the Galaxy Z Flip 7 FE (SM-F761B), which has a 3.4-inch external screen and a 6.7-inch inner screen. Similar-looking parts aren’t necessarily guaranteed to fit or work in another device, so the rule of thumb is clear: choose by the SM-F776 code, not by the phone’s appearance.

Original parts for Samsung Galaxy Z Flip 8 and what each one covers

Both parts available for this model are in Original quality, meaning they’re components from the manufacturer itself. In practical terms, this means the part retains the specifications the phone had when it left the factory, which is especially important for a foldable, where the screen and camera are the most expensive and fragile components.

The 6.9-inch foldable panel

The original complete screen for Samsung Galaxy Z Flip 8 is the inner foldable panel, a 6.9-inch Dynamic AMOLED 2X with a resolution of 2520 x 1080 and a 21:9 aspect ratio. It’s the screen you use when the phone is open, and it delivers the adaptive 1 to 120 Hz refresh rate, HDR10+ support and the 2600-nit peak brightness specified by Samsung. As this is an original panel, these features match the factory specifications.

Before placing your order, check which screen is damaged. The Flip 8 has two separate panels: the inner foldable screen and the 4.1-inch external FlexWindow, which you see when the phone is closed. If only the outer screen has been damaged, this isn’t the part you need. Repair shops should note that the inner panel uses ultra-thin glass (UTG) and works with the hinge, so handling it requires previous experience with foldable phones.

The 50 MP rear main sensor

The original 50 MP rear main camera for Z Flip 8 is the phone’s wide-angle module: a 50 MP sensor measuring 1/1.57 inches, with an f/1.8 aperture, Dual Pixel autofocus and optical image stabilisation (OIS). It’s the camera used for standard photos, 2x zoom at optical quality—which Samsung achieves by cropping the sensor—and 4K video recording at 60 fps.

Keep in mind that the rear camera unit has two cameras and this product replaces only the main one. The 12 MP ultra-wide camera is a separate module, so if the problem only occurs in 0.5x mode, this isn’t the faulty part. Also, although the Flip 7 and Flip 7 FE have a 50 MP main sensor too, the matching resolution doesn’t confirm that their modules are interchangeable with the Flip 8’s.

Fingerprint sensor in the side button and two screens: features of the Z Flip 8

The Flip 8’s fingerprint reader is built into the side key, not under the screen. That’s why fingerprint unlocking doesn’t depend on the inner panel: if fingerprint recognition stops working after a drop, the fault is in another component and replacing the screen won’t fix it. This is useful to know when diagnosing faults.

Having two screens also affects the repair estimate. A single impact can damage the FlexWindow, the inner panel or both, and each is a separate part. Check both screens with the phone open and closed before deciding which replacement part to order, especially if you’re buying for a repair shop customer.

If you’re leaving the device with a technician, Samsung includes Maintenance mode under Settings > Battery and device care. It creates a temporary session without access to your photos, messages or accounts, allowing the technician to test the screen and cameras after replacement without wiping the phone.

Frequently asked questions about Samsung Galaxy Z Flip 8 parts

Are Galaxy Z Flip 7 parts compatible with the Z Flip 8?

They look almost identical on the outside and have the same screen sizes, but there’s no confirmation that their components are interchangeable. The Flip 8 has a thinner frame and a redesigned hinge. Always buy the replacement part listed for code SM-F776.

Does the complete screen also include the external screen?

No. The complete screen listed here refers to the 6.9-inch inner foldable panel. The 4.1-inch FlexWindow is a separate part, located on the upper half of the outer face.

How do I know if I need the main camera or the ultra-wide camera?

Open the camera and switch between 1x and 0.5x mode. If the problem only appears at 1x or 2x, it affects the 50 MP main sensor, which is the one we offer. If it only occurs at 0.5x, the 12 MP ultra-wide camera is affected.

Will the phone remain water-resistant after repair?

The Flip 8 comes with an IP48 rating. Once the device has been opened, it can’t be guaranteed to retain this level of protection, as this depends on the adhesives and the reassembly. We recommend keeping it away from water after repair.