LCD and Touch Screen for Samsung Galaxy J5 / J500

Thinking of installing it yourself at home? Read these installation tips
Tip 1: Perform the test before finalizing the installation
When going to perform the test, do not remove the protective films that the product comes with to ensure that it does not get scratched or dusty. Pay attention to the problem of static electricity, it is very important. These parts are extremely sensitive.
Before starting the repair, make sure to use an ESD band (electro static discharge), you can find an ESD Discharge Band at iLevante or any electronics store. This band will prevent static electricity from damaging any electronic component.
Some parts for the screen are really sharp, be careful with them.
Tip 2: Simulated tests
The replacement of screens is a fragile process, do it calmly and quietly. We suggest that you do a test before assembling the whole phone. Simply when you have it disassembled, place the part and perform the test. Sometimes a bad connection can cause it not to work properly. That is why we advise you to do a test before closing the device again.
Tip 3: Be careful with flex cables
Make sure not to bend the flex cables (the flex cable is that flexible piece that carries the connector. If you bend it beyond 90 degrees it is very possible that it will stop working properly. Simply handle it with care and you should not have any problems.


General Type LCD and touch screen




All touch screens and LCDs are extremely well protected so that they do not suffer any possible damage during transport.