Repair parts Motorola Razr Fold

The Motorola Razr Fold is Motorola’s first book-style foldable: it opens horizontally like a small tablet, rather than folding vertically like the clamshell razr models. In this category, you’ll find original parts for this model, designed both for people repairing their own phone and for repair shops that need manufacturer parts. As a high-end device with two screens, its own hinge and a vegan leather back, choosing the exact right part is especially important.

XT2651 codes: how to check that you have a Motorola Razr Fold

The references associated with this model are XT2651 and XT2651-1, the latter being the international variant sold in Europe. To check the model on your device, go to Settings > About phone and check the model; the full XT code is usually listed in the regulatory information section. If your phone shows an XT2651 code with a different suffix, it may be a version intended for another market or operator: contact us before placing your order.

The easiest way to avoid mistakes is to check the design. When folded, the Razr Fold measures around 160 x 73,6 x 9,9 mm, and when opened it has an almost square 8,1-inch screen. The other razr models in the range are vertical clamshells, with a different external screen, chassis and hinge, so their parts are not interchangeable with this model, even if they share the same product name.

Two panels and a vegan leather back: which part does your Motorola Razr Fold need?

What the original part covers across the two pOLED panels

This model has two different screens, which is worth bearing in mind before buying because they are not interchangeable:

• Foldable inner panel: 8,09 inches, LTPO pOLED, 2484 x 2232 resolution, up to 120 Hz and protected by ultra-thin glass (UTG).
• Outer panel: 6,56 inches, LTPO pOLED, 2520 x 1080 resolution, up to 165 Hz and protected by Corning Gorilla Glass Ceramic 3.

The original complete screen for Motorola Razr Fold is a manufacturer part, so it matches the type of panel the phone comes with from the factory, including its LTPO technology and refresh rate. Before ordering, check the listing to see which panel it covers and what the assembly includes, then compare it with your damaged screen. This is the high-end option: it’s suitable if you want to retain the brightness, variable refresh rate and stylus functionality as supplied, which is especially important for a foldable in this price range.

Vegan leather back with camera frame included

Motorola uses vegan leather rather than glass on the back of this model, with two factory finishes that have different textures: one with a diamond piqué-style pattern and the other with a silky feel. So before placing your order, check the listing to make sure the finish matches your phone if you want the result to look identical to the original.

The original rear cover with camera frame for Razr Fold comes with the camera module frame already fitted, so there’s no need to transfer that part from the old cover, a delicate job when the frame is bent or the rear cover is broken. This isn’t a simple clip-on part: the phone is certified for water resistance and the rear cover is sealed to the chassis, so replacing it requires opening the device with tools and applying new adhesive. It’s a routine job for a repair shop; for individuals, previous experience opening sealed phones is recommended.

Side-mounted fingerprint sensor, stylus and IP sealing on the Motorola Razr Fold

The Razr Fold’s fingerprint sensor is on the side, not under the panel. In practice, this means that replacing the screen doesn’t require replacing or recalibrating a sensor integrated into the display, a common complication with other foldables and high-end phones.

The model is compatible with the Moto Pen Ultra, which works on both screens according to published tests. After replacing either panel, check writing with the stylus, touch response across the entire surface and performance around the fold before completing the repair.

The phone has IP48 and IP49 certification from the factory. This protection depends on a seal that is broken when the device is opened, so the same water resistance cannot be guaranteed after a repair, even if new adhesive is used. There is also no publicly available official information about software pairing of the screen or rear cover with the board on this model, so the sensible approach is to test all functions when you’re finished.

What repair shops ask most about the Razr Fold

Are parts from a clamshell razr compatible with the Razr Fold?

No. The Razr Fold is a book-style foldable with its own screens, chassis and hinge. Components from vertical clamshell razr models have different dimensions and connectors, even if they share the same range name.

Will fingerprint unlocking stop working if I replace the screen?

This model’s fingerprint sensor is on the side, not under the panel, so replacing the screen does not affect an in-display reader. Even so, check that the side button and its connection are correctly fitted after assembly.

Will the Moto Pen Ultra work with the replacement screen?

The screen in the listing is original, of the same type as the one fitted to the phone at the factory. We recommend testing the stylus across the entire surface, including around the fold, before completing the repair.

Will it remain water-resistant after replacing the rear cover?

This cannot be guaranteed. The IP48/IP49 certification relies on the factory seal, which is broken when the phone is opened. New adhesive helps seal the cover properly, but it does not provide a new certification.