Repair parts Xiaomi Redmi Note 15 Pro 4G
Receive it on tomorrow friday 30 october
Receive it on tomorrow friday 30 october
In this section, you’ll find spare parts for the Xiaomi Redmi Note 15 Pro 4G: complete screen, battery, rear cover, ultra-wide-angle camera, camera lens, charging port, speaker and button flex cable. This is the version equipped with the MediaTek Helio G200 Ultra processor, a 6.77-inch AMOLED screen and a 6500 mAh battery. It should not be confused with the 5G variant, which shares the same commercial name. Whether you’re a private customer looking for a part for a one-off repair or a repair shop, you’ll find parts in Original or Premium quality, depending on the job.
Redmi Note 15 Pro 4G or 5G: how to check that yours is the 25100RA69G
Xiaomi sells two phones under the Redmi Note 15 Pro name, and the name alone isn’t enough to identify the right part. This category is for model code 25100RA69G, which you can check in Settings, under About phone and Detailed specifications, or on the original box label. The processor is also shown in the same section: if it says Helio G200 Ultra, you have the 4G version.
The Redmi Note 15 Pro 5G (global code 25080RABDG) features a Dimensity 7400 Ultra chip, a larger 6.83-inch screen and IP68 certification, compared with IP65 on the 4G. The body size, screen and battery differ, so the screen, rear cover and battery aren’t interchangeable between the two versions, even though they look similar. Don’t confuse it with the Redmi Note 15 4G, which doesn’t have the Pro name: it’s a different model, with a different processor and main camera, and has its own parts catalogue.
Which part does your Xiaomi Redmi Note 15 Pro 4G need, based on the fault?
Premium replacement for the 6.77-inch AMOLED screen
The factory screen is a 6.77-inch AMOLED with a resolution of 2392 x 1080, a refresh rate of up to 120 Hz and Gorilla Glass Victus 2. Beneath it is the optical fingerprint reader, which reads your finger using light emitted by the screen itself. That’s why the first thing worth checking in a replacement part’s product details is the screen technology: under-screen fingerprint recognition only works with OLED screens.
For this model, we offer the complete screen compatible with Redmi Note 15 Pro 4G in Premium quality, a compatible alternative at a lower price than the official service part. Check the product details to see exactly what’s included and the refresh rate it supports. Please note that Xiaomi’s official replacement part is supplied fitted to a frame, with different part numbers depending on the phone’s colour. If your phone’s frame is bent or damaged, take this into account before deciding which part you need.
6500 mAh battery with part number BN6E
The phone uses a 6500 mAh battery with part number BN6E, which is also used for Xiaomi’s official replacement battery for this model. Our compatible BN6E 6500 mAh battery is Premium quality and has the same rated capacity as the factory battery. Before buying, check the part number printed on the battery you’re removing: the batteries for the Redmi Note 15 Pro 5G and Redmi Note 15 4G are different and won’t fit.
As for the software, we haven’t found any documentation indicating that HyperOS displays a non-genuine part warning on this model when a compatible battery is installed. Also bear in mind that 45 W fast charging depends on the charging port and charger, not just the battery.
Plastic rear cover attached with adhesive
Unlike other phones in its range with a glass back, the 4G has a plastic rear cover. It isn’t screwed on: it’s attached to the chassis with adhesive, which forms part of the phone’s seal. As it isn’t made of glass, replacing it is easier than on a model with a glass back, but you’ll need new adhesive to close the phone properly.
The original rear cover for Redmi Note 15 Pro 4G is Original quality. Check the product details for the available colour and whether the camera lens is pre-fitted. If only the glass protecting the cameras is broken, the original rear camera lens with frame is available separately, so you don’t have to replace the complete rear cover.
Camera, charging, sound and buttons
For other faults, the catalogue for this model includes the following parts:
- Original 8 MP ultra-wide-angle camera: this is the secondary rear sensor; the 200 MP main camera is not replaced with this part.
- Original USB charging port, in Original quality.
- Original main speaker for Redmi Note 15 Pro 4G, in Original quality.
- Compatible power and volume button flex cable, in Premium quality.
Optical fingerprint reader and IP65: what changes when you open a Xiaomi Redmi Note 15 Pro 4G
The fingerprint reader sits beneath the screen and uses calibration data stored on the device. On Xiaomi phones with an optical fingerprint reader, the CIT diagnostic menu, accessed using the code *#*#6484#*#*, includes a finger calibration option that you should run after replacing the screen. Technical forums report cases of Xiaomi phones where the fingerprint reader stopped working after the sensor was also replaced, so if you’re only replacing the glass, it’s best to keep the original sensor.
The original IP65 rating depends on the factory seals and adhesives. Once the phone has been opened, the same level of dust and water resistance can’t be guaranteed, even if you fit a new seal. Bear this in mind if the device is used outdoors or in areas with high levels of dust.
Frequently asked questions from repair shops about the Redmi Note 15 Pro 4G
Will a screen from the Redmi Note 15 Pro 5G fit?
No. The 5G has a 6.83-inch screen and a body with different dimensions, while the 4G uses a 6.77-inch screen. Always check the code 25100RA69G before ordering the part.
Will the fingerprint reader work with the Premium screen?
It depends on the screen technology, which you should check in the product details: the optical reader requires an OLED screen. After fitting it, calibrate the fingerprint reader in the CIT menu to ensure reliable recognition.
How can I find out which battery my phone uses?
The battery for this model has the part number BN6E printed on it and has a capacity of 6500 mAh. If yours has a different part number, your phone may not be the Redmi Note 15 Pro 4G.
Should I replace the adhesive when replacing the rear cover?
Yes. The rear cover is glued in place, and the old adhesive loses its grip when removed. Fit new adhesive to secure the cover properly, bearing in mind that the original IP65 rating can’t be guaranteed.
