Repair parts Xiaomi Poco X8 Pro Max

In this category, you will find parts for the Xiaomi Poco X8 Pro Max, the model with a 6.83-inch display and Dimensity 9500s processor that Xiaomi announced on 17 March 2026. We stock the complete display, rear cover, various main camera components, charging port and motherboard flex cable. Check the model code before placing an order. Its name is very similar to that of the Poco X8 Pro, which is a different phone with different dimensions and parts.

Xiaomi Poco X8 Pro Max: 2602BPC18G for the global variant and 2602BPC18I in India

The model sold in Europe has the code 2602BPC18G. In India, it was approved as 2602BPC18I, and this variant has a 9000 mAh battery instead of the 8500 mAh battery in the global version. You can find the code in the specifications section of the settings menu and on the original box.

The most common mix-up is with the Poco X8 Pro. They were announced on the same day, but the Pro has a smaller display, an optical fingerprint reader and a different main camera sensor. Neither its display nor its rear cover will fit the Pro Max.

Xiaomi Poco X8 Pro Max: 6.83-inch 1.5K AMOLED with ultrasonic fingerprint reader under the display

Out of the box, the phone comes with a 6.83-inch AMOLED panel with a resolution of 2772 x 1280 pixels, a 120 Hz refresh rate and peak brightness of 3500 nits. It is protected by Gorilla Glass 7i. The ultrasonic fingerprint reader is located under the panel and is the most significant functional difference compared with the X8 Pro. The ultrasonic reader detects your fingerprint through the display, so the condition of the replacement panel directly affects unlocking.

Currently, the complete Poco X8 Pro Max display is available in Original quality. It is the right choice for a device that needs to retain 120 Hz and fingerprint unlocking. Xiaomi supplies its own module, already fitted to the front frame, in black, blue and white. Before buying, check the product listing to see whether the part includes a frame and whether it comes in a colour: if it includes a chassis, its colour must match your rear cover.

The fibreglass rear panel on the Poco X8 Pro Max is bonded to the chassis

The rear cover is not made of glass: Xiaomi manufactures it from fibreglass, over a metal frame. It is bonded to the central frame with adhesive and cannot be removed without heat. Xiaomi sells the rear cover adhesive for this model separately. If you replace the rear panel, make sure to apply new adhesive.

The complete rear cover with camera surround is currently available in Original quality. As it includes the camera module surround already fitted, you do not need to transfer the trim from the damaged cover. Bear in mind that the phone leaves the factory with an IP68 rating. This water resistance depends on how well the new seal is fitted, so it cannot be guaranteed after the phone has been opened.

Xiaomi Poco X8 Pro Max: 50 MP main camera with Light Fusion 600 sensor and OIS

The main camera features a 50 MP Light Fusion 600 sensor measuring 1/1.95 inches, an f/1.5 aperture and optical image stabilisation. There are three related replacement parts, and the one you need depends on the faulty component:

• The original 50 MP main camera replaces the sensor module. Choose this part if photos are out of focus due to a stabiliser fault, or if the app does not recognise the sensor.
• The rear camera lens is only the outer glass. It is the most affordable option when the glass is cracked and the frame is undamaged.
• The rear camera lens with frame also includes the trim. It is recommended if the frame is warped or scratched, or if you would prefer to receive the lens already assembled.

If you are replacing the complete rear cover, check what it includes first. As it already comes with the camera frame, you may not need to buy that assembly separately.

USB-C 2.0 and 100 W charging on the Xiaomi Poco X8 Pro Max connector

The connector is USB-C with USB 2.0 data transfer. It supports 100 W HyperCharge and 27 W wired reverse charging. A damaged connector will therefore first become noticeable through slower charging. Xiaomi supplies the connector as part of a lower sub-board.

The Poco X8 Pro Max USB charging port is currently available in OEM quality, which is generally more affordable than the branded replacement. Compare the photo with your part to check that the shape matches. The original motherboard flex cable connects this area to the main board. Choose it if the connector charges properly but the phone does not detect the cable or loses its connection to the lower section.

Poco X8 Pro Max compatibility with the Poco X8 Pro and Redmi Turbo 5 Max

Can I fit a Poco X8 Pro display in the Pro Max?

No. The X8 Pro has a smaller display and an optical fingerprint reader, while the Pro Max has a 6.83-inch panel with an ultrasonic reader. The dimensions and connectors are different.

Are Redmi Turbo 5 Max components compatible?

The Redmi Turbo 5 Max is the Chinese version, with the same processor and display dimensions as the Pro Max, although it has a 9000 mAh battery and an IP69 rating. Xiaomi does not specify which parts are interchangeable between the two. To avoid any issues, buy parts listed for the 2602BPC18G.

I have the Indian 2602BPC18I version: will these parts fit?

It has the same design, 6.83-inch display and ultrasonic fingerprint reader, but a higher-capacity battery. The parts in this category are listed for the global version. If your device is the 2602BPC18I, check the product listing or contact us before ordering.

Will it still be water-resistant after replacing the rear cover?

The IP68 rating depends on the adhesive that secures the cover to the chassis. Applying new adhesive improves the seal, but the phone will no longer retain its factory rating.