Repair parts Xiaomi Poco M8 Pro
Receive it on tomorrow friday 30 october
In this category, you’ll find spare parts for the Xiaomi Poco M8 Pro 5G, the global model with reference 2510EPC8BG, which features a 6.83-inch AMOLED screen and Snapdragon 7s Gen 4 processor. Most of the catalogue is now available in Original quality: screen, cameras, flex cables and earpiece. The rear cover is sold in OEM quality and in three colours. Before placing your order, check your device’s reference, as the name “M8” is shared by two very different phones.
The Poco M8 Pro 2510EPC8BG shares its platform with the Redmi Note 15 Pro+, not the Poco M8 5G
The Poco M8 Pro is Poco’s version of the Redmi Note 15 Pro+: the same 6.83-inch screen size, processor and almost identical chassis dimensions. The main difference is the rear camera: the Redmi has a 200 MP sensor, while the Poco has a 50 MP sensor. The rear finish also differs. So, even though the two phones look similar, don’t assume their cameras or rear covers are interchangeable.
The most common mistake is confusing it with the Poco M8 5G, without “Pro”. It’s a different phone: a 6.77-inch screen with Full HD+ resolution, a Light Fusion 400 main camera alongside a 2 MP depth sensor, and a 20 MP front camera. Its screen, cameras and housing are not compatible with the M8 Pro. To check, go to Settings > About phone and make sure the model listed is 2510EPC8BG.
The Xiaomi Poco M8 Pro’s 1.5K AMOLED screen incorporates the optical fingerprint reader
As standard, the Poco M8 Pro comes with a 6.83-inch AMOLED panel with a resolution of 2772 x 1280 pixels, a refresh rate of up to 120 Hz, HDR10+ and Dolby Vision support, and 3840 Hz PWM dimming. The optical fingerprint reader sits beneath the panel and reads your finger through the screen itself. So the screen affects more than just the image and touch response: it also affects fingerprint unlocking and front protection, which is provided by Gorilla Glass Victus 2.
The complete screen for Xiaomi Poco M8 Pro currently available in the catalogue is Original quality, the premium option in the replacement parts market for this model. It is the same type of panel fitted to the phone at the factory, so it retains the resolution and refresh rate and lets through the light required by the optical sensor. You may need to recalibrate the fingerprint reader after replacing the screen so it reads as accurately as before. If it doesn’t detect your finger straight away, recalibrate it before completing the repair.
Three cameras on the Xiaomi Poco M8 Pro: 50 MP with OIS, 8 MP ultra-wide and 32 MP front
Each camera for the Poco M8 Pro is sold as a separate module, so you only need to order the one that’s faulty. The Original 50 MP main rear camera is the Light Fusion 800 sensor with optical image stabilisation. It handles most of the phone’s photos and 4K videos, and it is not the same as the 200 MP module in the Redmi Note 15 Pro+.
The 8 MP ultra-wide camera is the rear wide-angle camera, while the 32 MP main front camera is used for selfies and video calls. Both are now available in Original quality. If the camera focuses correctly but the photo has spots or reflections after an impact to the rear, it’s usually the protective glass that’s damaged, not the sensor.
In that case, the part you need is the rear camera lens and frame. Its listing mentions the Poco M8 5G, which has a different camera layout. We therefore recommend checking the compatibility details in the listing before ordering.
Black, Silver or Green: the Poco M8 Pro rear housing includes the camera frame and adhesive
The complete rear cover with camera frame and adhesive for the Xiaomi Poco M8 Pro 5G is available in Black, Silver and Green, the three finishes in which the phone is sold. Choose the same colour as your device for a consistent look with the sides and frame.
As the camera frame is already fitted, you don’t need to transfer the trim from the old cover to the new one. The included adhesive lets you reattach it to the chassis. It is currently sold in OEM quality, at a mid-range price compared with an official service replacement. The cover is glued on, not clipped into place. When the Redmi Note 15 Pro+, its sister model, was dismantled, the rear cover did not break into pieces when removed, so the old cover can be taken off relatively cleanly. The phone leaves the factory with IP68 certification, but after opening it, water resistance depends on how well the adhesive is sealed, so it cannot be guaranteed.
On the Xiaomi Poco M8 Pro, the flex cables and earpiece are model-specific parts
The power and volume button flex cable combines the Poco M8 Pro’s side buttons in a single part. The motherboard connection flex cable is the interconnect cable for the main board. Both are now available in Original quality. When the Redmi Note 15 Pro+ is dismantled, its internal components are secured with screws and standard connectors, so these flex cables can be replaced individually.
The Original earpiece speaker is used for calls. The Poco M8 Pro features symmetric stereo sound, with the top channel playing through the earpiece area. This part therefore affects both calls and audio balance when watching videos or gaming on the speaker.
Frequently asked questions when buying parts for the Poco M8 Pro 2510EPC8BG
Are parts for the Redmi Note 15 Pro+ compatible with the Poco M8 Pro?
They share a 6.83-inch screen, processor and dimensions, but the main camera (200 MP versus 50 MP) and the rear finish are different. The cameras and rear cover should not be swapped between models. For everything else, the most reliable option is to buy parts intended for the Poco M8 Pro.
Will the fingerprint reader still work after replacing the screen?
The sensor is optical and sits beneath the panel, so it needs a screen that lets light pass through correctly. It may need to be recalibrated after replacement. A screen protector not designed for optical readers can also affect recognition.
If I replace the rear cover, do I also need the camera lens?
No, because the listed rear cover includes the camera frame. The separate lens and frame part is only needed if the camera glass is broken but the rear cover is still intact.
Will the Poco M8 Pro remain water-resistant after repair?
The IP68 certification applies to the phone as it leaves the factory. Once opened, protection depends on the newly fitted adhesive being properly sealed around the entire perimeter, so it cannot be guaranteed.
