Repair parts Xiaomi Poco M7 4G
Receive it on friday 06 de november
In this section, you’ll find spare parts compatible with the Xiaomi Poco M7 4G: a screen assembly, two charging port options and the rear camera lens. This 2025 model has a 6.9-inch LCD screen at 144 Hz and a fingerprint reader built into the power button. Its internal components are almost identical to those of the Redmi 15 4G, which is useful for both individuals and repair shops working on both models. Before placing your order, check the model code, as several different phones are sold under the Poco M7 name.
Poco M7 4G, M7 Plus or M7 5G: how to check whether your Xiaomi is the 25062PC34E
The Poco M7 4G is sold under two codes: 25062PC34E, the European variant, and 25062PC34G, the global variant. Both versions share the same hardware, so the spare parts in this category fit both. To check the code on your device, go to Settings, About phone and Detailed specifications, then look for the Model field.
This Poco is a rebranded version of the Redmi 15 4G, whose codes begin with 25062RN2D (A, E, L or Y, depending on the region). Both have a Snapdragon 685 processor and the same 6.9-inch IPS screen. In service parts catalogues, the Poco M7 4G screen is also listed as compatible with the Redmi 15 4G.
Other similarly named models that you shouldn’t confuse with yours:
- Poco M7 Plus (25057PC09I): this is the 5G version, equivalent to the Redmi 15 5G, with a different processor. Although its screen is also 6.9 inches, don’t assume its parts will fit without checking the code.
- Poco M7 5G: this is the model launched in India in March 2025, with an HD+ screen at 120 Hz. Its screen is not interchangeable with the 4G version.
- Poco M7 Pro 5G: it has a 6.67-inch AMOLED screen, so all its parts are different.
Xiaomi Poco M7 4G spare parts: what each quality offers
The 6.9-inch IPS panel and Premium quality
The Poco M7 4G comes with a 6.9-inch IPS LCD screen with a resolution of 2340 x 1080, a refresh rate of up to 144 Hz and a touch sampling rate of 288 Hz, according to the manufacturer. Our Premium screen assembly compatible with Xiaomi Poco M7 4G is a third-party replacement supplied with the panel and touchscreen already bonded together, so you don’t need to separate the glass from the LCD.
There’s one advantage with this model: the fingerprint reader is on the side button, not under the glass, so replacing the screen won’t affect fingerprint unlocking. Also, as this is an LCD panel, OLED-specific features are not involved.
Premium quality is the most affordable compatible option. With compatible replacements, maximum brightness and performance at higher refresh rates may differ from the factory-fitted panel, as the manufacturer only provides those figures for its own part. If these factors are important to you, check the product details. Also check whether the screen includes a frame, as this affects installation time.
Two versions of the USB-C connector on the sub-board
On the Poco M7 4G, the USB-C connector isn’t soldered to the mainboard. It’s on a sub-board at the bottom of the phone, which also includes the microphone. So when charging fails, replacing this part is usually all that’s needed. You have two options:
- OEM charging port for Poco M7 4G: in OEM quality, it is usually more expensive and is the option for anyone looking for the closest match to the original part.
- Premium compatible USB charging port for Poco M7 4G: in Premium quality, it is the more affordable option for charging your phone and connecting it by cable again.
The phone supports 33 W charging. After replacing the part, test charging with the original charger to confirm that fast charging works. As the microphone is also on the board, make a test call before closing the phone.
Protection for the rear camera module
The rear camera lens compatible with Poco M7 4G is the glass covering the rear cameras, including the 50 MP main camera. It’s worth replacing when the glass is scratched or broken but the camera still works, as this is much cheaper than replacing the module. If photos still look poor after fitting the new lens, the fault is in the sensor, not the glass. Before fitting it, check whether the part comes with its own adhesive.
Side fingerprint reader and glued back cover: what affects Poco M7 4G repairs
On the Poco M7 4G, the fingerprint reader is built into the power button and connects to a component in the chassis, not the screen. So you can replace the screen without affecting the fingerprint reader. However, if you damage that connector during disassembly, the sensor may stop working.
The back cover is glued in place and needs to be heated to remove it. This affects access to the charging port, as its board is removed from the back once the cover is off. Make sure you have new adhesive to reseal the phone. Bear in mind that once the phone has been opened, its factory IP64 protection cannot be guaranteed.
Your most frequently asked questions about the Poco M7 4G and its Redmi 15 4G twin
Will Redmi 15 4G parts fit the Poco M7 4G?
They share the same design under different brand names, and service catalogues list the screen as compatible with both. Even so, always check that the phone’s code is 25062PC34E/G or 25062RN2D, not that of a 5G variant.
Will I lose the fingerprint reader if I replace the screen?
No. The sensor is located in the side button and doesn’t depend on the panel. The Premium screen doesn’t interfere with fingerprint unlocking.
Is the Poco M7 4G the same as the Poco M7 Plus?
No. The M7 Plus is the 5G version and has a different processor and mainboard. Although both have a 6.9-inch screen, you shouldn’t mix their parts without checking first.
Do I need to remove the screen to replace the charging port?
No. You can access the USB-C sub-board from the back by removing the back cover. You will need heat and new adhesive to reassemble the phone.
