Repair parts Xiaomi 17T
Receive it on tomorrow friday 06 november
Original replacement parts for Xiaomi 17T and its glass-fibre chassis
In this category, you’ll find parts for the Xiaomi 17T, the most compact phone in the 17T range. It has a 6.59-inch screen, a plastic frame and a plastic back cover reinforced with glass fibre. Almost the entire range is Original quality: complete screen, 50 MP main camera, charging connector, speaker and various flex cables. It’s ideal both for individuals repairing their own phone and for repair shops that need the component for an exact model reference.
2602DPT53G, 2602DPT53I or 17T Pro: check which Xiaomi you have
The Xiaomi 17T is sold with code 2602DPT53G in the global variant, which is sold in Spain, and code 2602DPT53I in the Indian edition. Both share the same reference, 2602DPT53, and the suffix only indicates the market. You can check the model in the phone settings, under About phone, or on the label on the original box.
The most common mistake is to mix it up with the Xiaomi 17T Pro (code 2602EPTC0G in its global variant). They were launched at the same time and look very similar. Here are the key differences to consider when choosing a replacement part:
- Screen: 6.59 inches and 120 Hz on the 17T; 6.83 inches and up to 144 Hz on the 17T Pro.
- Materials: plastic frame and back on the 17T; aluminium frame and glass back on the 17T Pro.
- Charging: the 17T supports up to 67 W wired charging via a USB-C 2.0 port; the Pro supports 100 W.
Don’t confuse it with the Xiaomi 15T, the previous generation, either. Its screen is 6.83 inches, so the screen is not interchangeable. However, they do share some parts, such as the charging port.
Which parts in the range are compatible with your Xiaomi 17T and which are for the 17T Pro
What keeps the original 6.59-inch AMOLED screen intact
The complete original screen for Xiaomi 17T is Original quality. It’s the same type of screen fitted to the phone at the factory: 6.59-inch AMOLED, with a resolution of 2756 x 1268 pixels and a refresh rate of 120 Hz. That’s why it’s the right choice for retaining the original image and smoothness specifications.
The 17T’s fingerprint reader is located under the screen, but it is not part of the screen: it’s a separate component, shown further down. Before ordering the screen, check that your phone is a 17T and not a 17T Pro or 15T, as all three have different screen sizes and the part won’t be compatible.
Who the OEM glass back cover is designed for
The complete back cover with camera frame for Xiaomi 17T Pro is OEM quality and is made for the 17T Pro, not the 17T. The Pro has a glass back and a larger body, while the 17T has a plastic back reinforced with glass fibre, so they are not interchangeable. If you have the Pro, this version saves you work because it already includes the camera frame, so there’s no need to transfer it from the damaged cover. We’ve included it here because the two models are often confused: check your phone’s code before buying.
Camera, charging port and speaker with their own references
The original 50 MP main rear camera is the Light Fusion 800 sensor with optical stabilisation, the main camera in the triple module developed with Leica. It’s assigned to the 17T, so don’t assume the Pro’s camera is equivalent.
There are also two components that work with another model in the range:
- The original charging port for Xiaomi 15T and 17T works with both models, allowing a repair shop to use a single reference for both.
- The original earpiece speaker for 17T and 17T Pro is shared by both phones in the series.
Flex cables that vary depending on the exact version
The buttons are different from the speaker: there’s one power and volume flex cable for Xiaomi 17T and another side button flex cable for the 17T Pro, each for its own model. The range is completed by the 17T flash sensor flex cable and the original fingerprint sensor integrated into a flex cable, all in Original quality.
Optical in-screen fingerprint reader: what changes when repairing a Xiaomi 17T
The Xiaomi 17T has an optical fingerprint reader located under the screen. As it’s a separate module, you can replace the screen without replacing the sensor, and vice versa. Bear in mind that when replacing either part, fingerprint recognition depends on both being correctly aligned.
On Xiaomi phones with an in-screen fingerprint reader, after replacing the screen or sensor you’ll usually need to recalibrate the fingerprint reader from the system’s CIT test menu and register your fingerprints again. If the phone won’t let you add fingerprints after the repair, check the calibration first before assuming the part is faulty.
Out of the box, the 17T has an IP68 rating, but this protection depends on the factory seal. Once the phone has been opened, water resistance is no longer guaranteed, even if you apply new adhesive.
Frequently asked questions about Xiaomi 17T replacement parts
Will the Xiaomi 15T screen fit the 17T?
No. The 15T has a 6.83-inch screen, while the 17T has a 6.59-inch screen and a more compact chassis. They do share the charging port, which is listed in the range as compatible with both.
Can I use 17T Pro parts in my 17T?
Only if the product name specifies this, as with the earpiece speaker. The screen, back cover and button flex cable differ between the models, so check that the product details mention your exact version.
Do I need to replace the fingerprint sensor when replacing the screen?
Not necessarily. The 17T’s optical reader is a separate part from the screen, so you can reuse it if it’s still working properly. You’ll usually need to recalibrate the fingerprint reader after fitting the screen.
What’s the difference between codes 2602DPT53G and 2602DPT53I?
Both belong to the same Xiaomi 17T: G denotes the global version and I denotes the Indian version. Both references are linked to this category.
