Repair parts Xiaomi 17 Ultra
Receive it on friday 06 de november
Here you'll find spare parts for the Xiaomi 17 Ultra, Xiaomi's flagship unveiled in China in December 2025, featuring a 6.9-inch screen and a Leica camera with a one-inch main sensor and a 200 MP periscope lens. This category includes the complete screen, the rear camera lens and frame assembly, and three internal flex cables. Before ordering, check the model code: the name is shared by regional editions and a Leica version with its own rear cover.
Xiaomi 17 Ultra 2512BPNDAG vs Leica Leitzphone 25128PNA1G
The standard Xiaomi 17 Ultra has the code 2512BPNDAG in its global version and 2512BPNDAC in the Chinese version. According to the technical specifications, both share the same dimensions (162.9 x 77.6 x 8.3 mm), screen and cameras. The Leica Leitzphone powered by Xiaomi edition, available in Europe from March 2026, has a different code, 25128PNA1G, although it features the same processor, 6.9-inch screen and camera system.
The code appears on the box and in the About phone section of the settings. If you see 25128PNA1G, you have the Leitzphone: it is distinguished by a rotating ring integrated into the camera island, which controls zoom, exposure or focus, as well as a textured side frame and an all-black rear cover. As this ring changes the exterior design of the module, check compatibility for any rear camera part before buying it.
The Xiaomi 17 Ultra features a 6.9-inch LTPO OLED with an ultrasonic fingerprint reader
The factory-fitted panel is a 6.9-inch LTPO OLED with a resolution of 2608 x 1200 pixels, an adaptive refresh rate of 1 to 120 Hz and a stated peak brightness of 3,500 nits, protected by Xiaomi Shield Glass 3.0. An ultrasonic fingerprint reader sits beneath the panel and reads your finger through the screen. For this reason, the replacement part must retain the layers and thickness of the original assembly: both the reader and variable refresh rate depend on them.
We currently offer the complete screen for Xiaomi 17 Ultra in Original quality, the highest grade on the spare parts market and also the most expensive. It is the right choice if you want to retain the brightness, resolution and refresh rate specifications described above without compromise.
For this model, screens are available with a frame and without a frame. Check the product details to see what is included: installation is easier with the frame already fitted, while without it the panel must be separated from the original chassis. Once installation is complete, register your fingerprints again and check the reader before closing the phone.
A single glass panel protects the Xiaomi 17 Ultra's three Leica cameras
The rear camera island of the Xiaomi 17 Ultra houses a 50 MP, one-inch main sensor, a 200 MP periscope telephoto lens with continuous optical zoom, and a 50 MP ultra-wide camera. In the official price list Xiaomi published in China, the main and periscope modules are among the phone's most expensive parts. If only the outer glass is broken, replacing it avoids changing sensors that are still working.
The rear camera lens and frame for Xiaomi 17 Ultra includes the glass and the frame that holds it in place. We stock it in Original quality, with an exact fit for the camera island of the standard edition. The Leitzphone has a rotating ring in this area, so check compatibility before ordering.
The phone leaves the factory with an IP68 rating. After it has been opened, its seal depends on the adhesive and installation, so the same level of protection cannot be assumed.
Three Original-quality flex cables for the inside of the Xiaomi 17 Ultra
The flex cables in this category are designed for the internal layout of the 17 Ultra. The 17 series also includes the 17, 17 Pro and 17 Pro Max, which have different dimensions and cameras, so don't assume a flex cable from another model will fit, even if it looks similar. All three are currently available in Original quality:
- The power and volume button flex cable carries the contacts for the frame's side buttons.
- The flash and sensor flex cable for Xiaomi 17 Ultra includes the rear camera island's LED flash and the sensor beside it.
- The 17 Ultra motherboard connection flex cable links the motherboard to other phone components.
Before ordering, compare the connector and shape of the flex cable with the part you are removing. This helps confirm you have the correct part, especially for the motherboard connection flex cable.
Frequently asked questions about codes 2512BPNDAG, 2512BPNDAC and 25128PNA1G
Is the Xiaomi 17 Ultra screen compatible with the Leica Leitzphone?
Published tests indicate that the Leitzphone uses the same panel specification: a 6.9-inch OLED with a resolution of 2608 x 1200 pixels. However, the side frame and finish are different. Contact us with your code, 25128PNA1G, before buying.
Are there any part differences between the Chinese 2512BPNDAC and global 2512BPNDAG versions?
The technical specifications list the same size, screen and cameras for both versions. The main difference is the software and regional configuration. If you have the Chinese version, let us know when placing your order so we can confirm the part number.
Does the Xiaomi 17 Ultra retain its water resistance after repair?
It has an IP68 rating from the factory, but this protection depends on the original seal. Once the phone has been opened, the same level cannot be guaranteed, even with Original-quality parts.
Will the ultrasonic fingerprint reader still work after replacing the screen?
The 17 Ultra's ultrasonic reader reads through the panel, so its operation depends on the screen being correctly seated. After replacement, delete the saved fingerprints, register them again and check that unlocking works before closing the phone.
