Repair parts Xiaomi 17

This category brings together replacement parts for the Xiaomi 17, the compact model in the 17 series, with a 6.3-inch screen and Snapdragon 8 Elite Gen 5 processor, sold in Europe under the code 25113PN0EG. Currently available are the complete screen, rear cover with camera frame and three flex cables, all in Original quality. Before ordering, check your device’s code: the 17 series includes a model with the same screen size but a very different rear cover.

The European Xiaomi 17 is the 25113PN0EG and does not share its rear cover with the 17 Pro

You can find the model code in your phone settings, in the About phone section, and on the box label. The Xiaomi 17 is produced under three regional model references:

• 25113PN0EG: global version, sold in Europe.
• 25113PN0EC: Chinese version, the first to reach the market, in September 2025.
• 25113PN0EI: Indian version.

All three share the same commercial name and internal development name (pudding), but the Chinese variant has different specifications from the global version, and it has not been confirmed that all its internal parts are identical. If your device is imported, check the details for each replacement part before buying.

The most likely source of confusion is the Xiaomi 17 Pro. It also has a 6.3-inch front panel, but includes a 2.7-inch rear secondary screen beside the cameras, with its own cable running inside the phone. This means the rear cover from one model will not fit the other, and you should not assume any other parts are compatible, even if the front looks identical. The Xiaomi 17T and 17T Pro belong to another family, with larger screens and a different processor.

The Xiaomi 17 has a 6.3-inch LTPO AMOLED panel with an ultrasonic fingerprint reader underneath

The original Xiaomi 17 screen is a 6.3-inch LTPO AMOLED with a 1220 x 2656 resolution, a variable refresh rate of 1 to 120 Hz and peak brightness of 3500 nits. When replacing it, you need the exact same assembly: the same image resolution, adaptive refresh rate and touch response across the entire edge. On such a narrow front, there is no room for parts with different dimensions.

The fingerprint reader is the key factor when choosing a replacement. The Xiaomi 17 uses an ultrasonic sensor beneath the screen, which reads your fingerprint through the panel. This means the new panel must sit perfectly over the sensor. Before closing the phone, register your fingerprints again and check that unlocking works.

The complete screen for Xiaomi 17 currently available is listed as Original quality. As it is a complete assembly, the glass, touchscreen and panel come already bonded together, so you do not need to separate the broken glass from the AMOLED. Check the product details to see whether the front frame and fingerprint sensor are included or whether you need to transfer them from your device: this is the practical difference that has the greatest effect on installation time.

The Xiaomi 17 rear cover is supplied with the camera frame already fitted

The Xiaomi 17 rear cover has no secondary screen, unlike the 17 Pro, and houses a module with three 50 MP cameras (main, telephoto and ultra-wide). The original rear cover with camera frame comes with the camera module trim already fitted, so there is no need to salvage it from the broken cover.

This option is especially useful when the impact has also damaged the camera area, as it lets you replace the rear glass and the camera module surround in a single operation. Before ordering, check two details in the product listing: whether the camera lens protectors are already fitted and whether the available finish matches your device’s colour.

Three original Xiaomi 17 flex cables: buttons, flash and board connection

Flex cables are the parts most closely linked to each model’s internal layout. In the 17 series, this layout varies between versions, since the 17 Pro includes the wiring for its rear screen. Always order a flex cable for the Xiaomi 17 and compare it with the one you are removing: the shape, length and connectors must match.

All three are currently available in Original quality, reducing the differences in thickness or fit that can sometimes occur with alternative-manufactured flex cables.

Xiaomi 17 (25113PN0EG): ultrasonic fingerprint reader, IP68 and Chinese and Indian variants

Will the Xiaomi 17 ultrasonic fingerprint reader still work after replacing the screen?

The ultrasonic sensor reads through the panel, so its operation depends on the new screen being properly fitted with no gaps. After installation, delete your registered fingerprints and add them again. Test the reader before sealing the phone so you can correct the fit if anything is not working properly.

Can I use Xiaomi 17 Pro parts in my Xiaomi 17?

Not the rear cover, as the 17 Pro’s includes a 2.7-inch secondary screen. Compatibility of other parts has not been confirmed, even though both front screens measure 6.3 inches, so the safest option is to use replacement parts specifically for the Xiaomi 17.

I bought my Xiaomi 17 in China (25113PN0EC). Will these replacement parts fit?

It is the same model with a different regional configuration, and the Chinese version has different specifications from the global one. Replacement parts in this category are identified by 25113PN0EG. If your code ends in EC or EI, check the compatibility information in the listing for each part.

Will the Xiaomi 17 retain its IP68 resistance after repair?

The Xiaomi 17 comes with an IP68 rating from the factory, but this protection depends on the original seal. Once the phone has been opened, the rating can no longer be considered maintained, regardless of which part is replaced.