Repair parts Realme 14T

In this category, you’ll find replacement parts for the Realme 14T 5G, model code RMX5078, which Realme unveiled in April 2025 with a MediaTek Dimensity 6300 processor, a 6000 mAh battery and IP69 certification. Here you’ll find the complete screen, back cover in two colours, charging connector, and main rear and front cameras. Before placing your order, check the model code: the 14T has the same dimensions as another phone from the brand, so it’s easy to choose the wrong parts.

Realme 14T model RMX5078: same dimensions as the Realme P3 5G, but different components

RMX5078 is the code Realme used to certify the Realme 14T 5G. You can find it in Settings, under About device. This is the reference you should check against the details for each replacement part. The 14T certifications list only this code, so there’s no need to distinguish between 4G and 5G versions.

The model most commonly confused with it is the Realme P3 5G. Both measure 163.15 × 75.65 × 7.97 mm and have a 6.67-inch AMOLED display at 120 Hz, but the P3 has a Snapdragon 6 Gen 4 processor, while the 14T has a Dimensity 6300. They also look different externally: on the 14T, the flash sits inside the rectangular camera island, whereas on the P3 it is outside the module. For this reason, the P3 back cover is not compatible with the 14T, even though the body has the same dimensions.

The Realme 14T has a 6.67-inch AMOLED display at 120 Hz with an optical fingerprint sensor under the panel

The original panel is a 6.67-inch AMOLED with FHD+ resolution of 2400 × 1080, a refresh rate of up to 120 Hz and a touch sampling rate of 1500 Hz. The fingerprint reader is not on the side button. It’s an optical sensor under the screen that reads your fingerprint through the panel, so the replacement you install directly affects unlocking.

Currently, the complete screen for Realme 14T is available in Original quality. This quality retains the features listed in the official specifications: AMOLED technology, 120 Hz and compatibility with the optical reader. It’s the most expensive option on the replacement parts market, costing more than compatible alternatives.

As this is a complete screen, the glass and touchscreen panel are already bonded together, so there’s no need to separate the layers. Once installed, delete the saved fingerprints and register them again. With Realme phones that have an optical reader, you often need to recalibrate the sensor after replacing the screen.

Realme 14T in Obsidian Black and Surf Green: the back cover includes the camera frame

The Realme 14T back cover with camera frame is available in Original quality and two colours: Obsidian Black and Surf Green. Choose the same colour as your phone. In some markets, Realme sold these colours under different names, so if you’re unsure, go by the actual appearance of the cover rather than the name on the box.

As the part includes the camera frame, there’s no need to transfer the trim around the rectangular camera island from the old cover. This matters on the 14T because the flash is inside that same module: if the original frame is cracked or scratched, replacing it along with the cover will make the camera and flash area look like new. Check the product details to see whether any other components are included.

The Realme 14T back cover is attached to the chassis with adhesive and forms part of the seal that provides IP69 certification. You’ll need new adhesive to replace it, and water resistance after the repair depends on how the installation is carried out.

Realme 14T: 50 MP OV50D40 rear sensor and 16 MP Sony IMX480 front camera

The rear camera assembly on the Realme 14T has a 50 MP main camera with an OmniVision OV50D40 sensor (f/1.8, 1/2.88") alongside a 2 MP monochrome auxiliary camera. The Realme 14T 50 MP rear main camera replaces only the main camera, which is responsible for almost all photos and videos. The 2 MP monochrome camera is a separate sensor and is not included with this replacement part.

For selfies and video calls, there’s the original Realme 14T front camera, equipped with a 16 MP Sony IMX480 sensor and an f/2.4 aperture. Both cameras are currently available in Original quality, the highest range, with the same sensors Realme fitted at the factory and calibrated its image processing for.

The Realme P3 5G also has a 50 MP main camera and a 16 MP front camera, but that doesn’t mean the parts are interchangeable. Always check the RMX5078 code when choosing a replacement.

Realme 14T with USB-C and 45 W fast charging: connector in Premium quality

The Realme 14T is powered via USB Type-C at a maximum of 45 W, the figure Realme specifies for its 6000 mAh battery. The USB charging port compatible with Realme 14T is available in Premium quality, a compatible replacement part that usually costs less than an original part.

After installation, check that the phone indicates fast charging again when connected to a 45 W charger and that it connects properly to a computer for file transfers. Some sellers list this connector alongside connectors for other 2025 Realme models. The details for this part, however, specify the Realme 14T RMX5078, which is the reliable reference.

Frequently asked questions about replacement parts for the Realme 14T RMX5078

Is the Realme P3 5G screen compatible with the Realme 14T?

Both have a 6.67-inch AMOLED display at 120 Hz, an optical reader and the same external dimensions, and some parts listings group them together. Even so, the manufacturer doesn’t confirm that the panels are interchangeable. The safest option is to order a screen specifically for the RMX5078.

Will the fingerprint reader still work after replacing the 14T screen?

The optical reader requires an AMOLED panel to detect your fingerprint, and the screen in our catalogue uses this technology and is available in Original quality. After installation, register your fingerprints again. If registration doesn’t work, you may need to calibrate the sensor from the service menu.

Will the Realme 14T retain its IP69 certification after repair?

IP69 certification depends on the phone being properly sealed at the factory. Once it’s opened, water resistance depends on the new adhesive and the installation, so it cannot be guaranteed.

Is there a 4G Realme 14T with different parts?

The certifications list only the Realme 14T 5G with model code RMX5078. The replacement parts in this category are for that model.