Repair parts Realme 14 Pro
Receive it on monday 09 de november
In this category, you’ll find replacement parts for the Realme 14 Pro 5G, the model launched in January 2025 with a Dimensity 7300 Energy processor and model code RMX5056. We stock the complete screen, 6000 mAh battery, rear cover with camera frame, various flex cables and the main speaker. Before purchasing, check that your phone is the 14 Pro and not the 14 Pro+ or 14 Pro Lite. All three share a commercial name, but very few parts.
The Realme 14 Pro is identified by the RMX5056 code and its dual camera
The version sold in Europe and India uses the code RMX5056. The Chinese variant appears in certifications as RMX5055. You can check the code in the device information section under Settings, or on the box label. If you see a different code, check which of these models it matches before placing an order:
- Realme 14 Pro+ (RMX5051 global, RMX5050 China): 6.83-inch screen with 2800 x 1272 resolution, three rear cameras including a periscope telephoto lens, and 80 W charging. Its screen, rear cover and battery will not fit the 14 Pro.
- Realme 14 Pro Lite: 6.7-inch screen, Snapdragon 7s Gen 2 and 5200 mAh battery. It is a different device despite the name.
At a glance, the 14 Pro has two rear cameras: a 50 MP main camera with optical image stabilisation and a monochrome auxiliary camera. If your phone also charges at 45 W and has a 6.77-inch screen, you’re in the right category.
The Realme 14 Pro features a curved 6.77-inch OLED screen with an under-display fingerprint reader
The phone comes with a 6.77-inch OLED screen with FHD+ resolution (2392 x 1080), a refresh rate of up to 120 Hz and curved edges. Realme states a local peak brightness of 4500 nits. The fingerprint sensor is optical and integrated into the screen, so it reads your finger through the panel itself. For this reason, replacing the screen affects fingerprint unlocking.
The complete screen for Realme 14 Pro is currently available in Original quality. This quality retains the factory panel specifications: OLED, curved edges, 120 Hz and the expected performance of the optical sensor. It is the highest-end option available for this model on the replacement parts market.
Before ordering, check the screen size. The 6.83-inch panel on the 14 Pro+ has a different resolution and shape, and will not fit the 14 Pro chassis. If the impact has also damaged the fingerprint reader, remember that the sensor is sold as a separate part.
6000 mAh and BLPB75 battery reference for the Realme 14 Pro
Realme specifies a typical capacity of 6000 mAh and a minimum rated capacity of 5860 mAh for the 14 Pro, with 45 W SUPERVOOC charging. In the replacement parts sector, this model’s cell is identified by the reference BLPB75. This code is printed on the battery removed from the phone and is the quickest way to check that the replacement is correct.
The 6000 mAh BLPB75 battery compatible with Realme 14 Pro is available in Premium quality. It is a compatible cell, usually more affordable than official service parts, and retains the 6000 mAh capacity stated in the listing.
Do not confuse it with the battery for the 14 Pro+. Both models are listed with 6000 mAh, but the Pro+ charges at 80 W and has a different body. Supplier catalogues list the BLPB75 exclusively for the 14 Pro 5G.
The Realme 14 Pro rear cover varies in thickness depending on the finish
Realme produces two different rear panels for this model. One contains shell powder and thermochromic pigments that turn blue below 16 °C. The other has a suede-like finish. According to the official specifications, the device is 7.55 mm thick with the first finish and 7.79 mm with the second, so the rear cover is not the same part for both finishes.
The complete Realme 14 Pro rear cover with camera frame is currently available in Original quality and includes the camera frame. This means you won’t need to transfer the trim from the damaged cover. Before ordering, check that the finish in the listing matches your device.
The 14 Pro+ rear cover is not a suitable replacement. Its camera module is circular, has three openings and uses a different part reference. Also note that the IP66/IP68/IP69 rating depends on the factory seal, so it cannot be assumed to remain intact once the phone has been opened.
The Realme 14 Pro and 14 Pro+ share the fingerprint reader listed in the catalogue
Of all the small parts and flex cables in this category, only one is listed in the catalogue as suitable for both models:
- Fingerprint sensor flex assembly for Realme 14 Pro and Realme 14 Pro Plus, in Original quality: this is the optical module located under the screen.
- Power and volume button flex cable compatible with Realme 14 Pro, in Premium quality.
- Realme 14 Pro motherboard connection flex cable, in Original quality.
- Flash and sensor flex cable for Realme 14 Pro, in Original quality.
- Original main speaker for Realme 14 Pro.
With the exception of the fingerprint sensor, these components are listed only for the 14 Pro. The 14 Pro+ has a different camera module and charging system, so do not assume the flex cables are compatible between the two models even if they look the same in photos.
Frequently asked questions about buying replacement parts for the Realme 14 Pro RMX5056
Can I fit a Realme 14 Pro+ screen in my 14 Pro?
No. The 14 Pro+ uses a 6.83-inch panel with 2800 x 1272 resolution, while the 14 Pro has a 6.77-inch panel with 2392 x 1080 resolution. They differ in dimensions, shape and resolution.
Does the Realme 14 Pro Lite share parts with this model?
No. The Lite has a 6.7-inch screen, a Snapdragon 7s Gen 2 processor and a 5200 mAh battery. Always check the RMX5056 code to confirm that your device is a 14 Pro.
Which battery reference is used for the Realme 14 Pro?
In the replacement parts market, it is listed as BLPB75, with a typical capacity of 6000 mAh. Check the code printed on the battery you are removing before fitting the new one.
Will the phone retain its IP69 water resistance after repair?
There is no guarantee. The IP66/IP68/IP69 rating depends on the factory seal, which is lost when the rear cover or screen is removed.
