Repair parts Oppo Reno 16 Pro

Receive it on tuesday 24 de november
This category brings together spare parts for the international version of the Oppo Reno 16 Pro 5G, sold in Spain under reference CPH2863. It is a compact 6.32-inch model that shares its name with a considerably larger Chinese version, so it is worth checking the code before placing your order. Currently available are the original complete screen and the OEM USB charging port, suitable for repair shops and anyone repairing their own phone.
The European Oppo Reno 16 Pro is the CPH2863, not the Chinese PMK110
Oppo sells two different phones under the Reno16 Pro name. The global version, CPH2863, has a 6.32-inch screen, a Dimensity 8550 processor and approximate dimensions of 151 x 72 mm. The Chinese version, model code PMK110, features a 6.78-inch LTPO panel with a 120 Hz refresh rate and a Dimensity 9500s, so its parts will not fit the European model, nor will European parts fit the Chinese one.
To check, open Settings and go to About device, where you will find the model number. If it says CPH2863, the spare parts on this page are the ones you need. If the phone was imported and shows PMK110, it is a different device, even if it is advertised as a Reno16 Pro.
Also note the Oppo Reno16 (CPH2865). It has the same screen size, identical 2640 x 1216 resolution and almost identical external dimensions, to the extent that some screen protectors are sold for both models. However, its screen supports up to 120 Hz, while the Pro supports 144 Hz, and there is no confirmation that the panels are interchangeable. The safest option is to always order the part specified for the CPH2863.
6.32-inch 144 Hz AMOLED with optical fingerprint reader in the Reno 16 Pro
The standard panel in the Oppo Reno 16 Pro is an FHD+ AMOLED with a resolution of 2640 x 1216 pixels and refresh rates of 60, 90, 120 and 144 Hz. It has an optical fingerprint reader near the bottom, which detects your finger through the panel itself. This means the screen on this model affects 144 Hz smoothness, outdoor brightness and the fingerprint sensor's ability to read your finger through it.
The original complete screen for Oppo Reno 16 Pro 5G is an Original-quality replacement: the AMOLED panel fitted to this model at the factory, with the touch layer integrated. It is at the higher end of the spare-parts price range and is the right choice if you want the phone to retain the specifications it left the factory with: maximum refresh rate, resolution and under-display fingerprint reader functionality.
Before ordering, check the following:
- That the phone's code is CPH2863, not PMK110 or CPH2865.
- Whether the impact also damaged the aluminium frame, as a bent chassis can prevent the new panel from fitting properly.
- That the user knows the phone left the factory with IP68 and IP69K ratings and that, after opening it, water resistance depends on how it is resealed.
Wired charging only at 80 W SUPERVOOC on the Oppo Reno 16 Pro CPH2863
The CPH2863 does not support wireless charging, so the USB-C connector is the only way to charge its silicon-carbon battery. This connector supports up to 80 W SUPERVOOC and 80 W UFCS, and also carries digital audio. If the port fails, there is no alternative: no charging pad can replace it while you wait for the repair.
The OEM USB charging port for Oppo Reno16 Pro 5G is an OEM-quality component made for this model, at a more affordable price than official service parts. It is a sensible choice when the mainboard is working properly and the fault is limited to the connector, which takes the most wear in a phone that can only be charged by cable.
Before ordering, check that the handset is the CPH2863: the Chinese PMK110 has a larger body and a different processor, and this part is not designed for it. Once installed, test charging with a SUPERVOOC charger: with generic USB PD adapters, the Reno 16 Pro charges at considerably lower power, which does not mean the part is faulty.
Frequently asked questions about Oppo Reno 16 Pro CPH2863 spare parts
Will the Reno16 (CPH2865) screen fit the Reno 16 Pro?
They are almost identical externally: the same 6.32-inch screen size, the same resolution and almost identical dimensions. The difference is the refresh rate: the Reno16 supports 120 Hz, while the Pro supports 144 Hz. As there is no confirmation that the panel connector and electronics are the same, the safest option is to fit a screen specifically for the CPH2863.
My Reno16 Pro was imported from China. Will these parts fit?
If the model number is PMK110, no. That phone has a 6.78-inch LTPO screen, a different processor and a larger body, so neither the screen nor the port in this category is designed for it.
Will the fingerprint reader still work with the new screen?
The Reno 16 Pro's sensor is optical and reads your finger through the AMOLED panel, so it requires a screen made for this model. The Original-quality part is the panel fitted at the factory. However, after replacing it, we recommend deleting your saved fingerprints and registering them again.
Will the IP69K protection remain after replacing the screen or port?
The CPH2863 comes with IP68 and IP69K ratings from the factory, but this protection depends on seals and adhesives that are disturbed when the phone is opened. The same water resistance cannot be guaranteed after any repair, and we recommend informing the person who will use the phone.
