Repair parts Oppo A6 Pro 5G
Receive it on friday 06 de november
This section brings together replacement parts for the Oppo A6 Pro 5G, sold by Oppo in Europe under reference CPH2781: the 6.57-inch model with an AMOLED panel and fingerprint reader integrated beneath the glass. Other devices share the same name but have a different chassis, so it is worth checking the code before placing your order. Here you’ll find a screen, rear cover, button flex cable, loudspeaker and fingerprint flex cable, each with its quality clearly stated.
The European Oppo A6 Pro 5G is the CPH2781 and does not share its casing with the Indian CPH2827
Oppo has used the A6 Pro name for at least four handsets. The CPH2781 is the European and global variant: it has a 6.57-inch flexible AMOLED display, a Dimensity 6300 chip, dimensions of 158.2 x 75 x 8 mm and a weight of 185 g. The Indian A6 Pro 5G, CPH2827, has an HD+ LCD measuring 6.75 inches, a body measuring 166.6 x 78.5 mm and a weight of 216 g, so its screen and frame are not compatible with this category.
The quickest way to tell them apart without dismantling the phone is to check where you place your finger to unlock it: on the CPH2781, the fingerprint is read from the screen itself, while on the CPH2827 it is on the side. There is also an A6 Pro 4G (CPH2799), with the same 6.57-inch screen size but a different processor, and a Chinese A6 Pro with Dimensity 7300. If the phone starts up, you can find the exact code in Settings, under About device.
The Oppo A6 Pro 5G features a 120 Hz flexible AMOLED with an integrated optical fingerprint reader
As supplied, the CPH2781 has a flexible FHD+ AMOLED panel with a resolution of 2372 x 1080 pixels, a selectable refresh rate of 60, 90 or 120 Hz, peaks of 1400 nits in high-brightness mode and AGC DT-Star D+ glass. The fingerprint reader is optical and reads through the panel, so replacing the screen affects unlocking as well as the display.
We currently stock the complete Oppo A6 Pro screen in Premium quality, an equivalent part at a more affordable price than an official service part. Before ordering, check these three points in the product listing:
- Panel technology: the optical sensor needs a panel that lets light through, so under-screen fingerprint functionality depends on this.
- Refresh rate: check whether it supports the original 120 Hz or operates at a lower rate.
- Screen size and reference: the product name specifies A6 Pro; it must match the 6.57-inch screen of the CPH2781, not the 6.75-inch LCD of the CPH2827.
If you have any questions about these points, check with your phone’s code before ordering. For repair shops, confirming this with the customer in advance helps avoid returns because the fingerprint reader does not respond.
The Oppo A6 Pro 5G CPH2781 rear cover is sold complete with the camera frame
The original rear cover with camera frame for Oppo A6 Pro 5G CPH2781 includes the frame around the camera module, so you do not need to reuse the one from the damaged part. It is the only item in the list that explicitly mentions the CPH2781 code, reducing the risk of confusing it with the CPH2827 casing, which has different dimensions.
As the CPH2781 has no fingerprint reader on either the rear or the side, the cover does not need a sensor cut-out, and the camera opening is designed for its 50 MP plus 2 MP monochrome setup. Oppo states that the European model has IP68 protection, with testing in accordance with IP69, thanks to its factory seals. Once the phone has been opened, its water resistance depends on the adhesive and how it is reassembled.
What the Oppo A6 Pro 5G and A6 5G share in terms of flex cables and loudspeaker
The CPH2781 buttons control power and volume only
Since the fingerprint reader is under the screen, the side of the Oppo A6 Pro 5G CPH2781 has buttons without an integrated sensor. The power and volume button flex cable for Oppo A6 Pro 5G, in Original quality, combines both functions in a single strip, so the whole assembly is replaced even if only one button has failed.
The main loudspeaker is listed for the A6 5G and A6 Pro 5G
The European A6 Pro 5G features stereo speakers, and the original main loudspeaker for Oppo A6 5G and A6 Pro 5G is the main output for this system. Its dual model listing indicates that it fits both handsets. As the A6 5G shares the same 6.75-inch screen and dimensions as the Indian CPH2827, if your handset is a CPH2781, check compatibility with us before ordering.
The fingerprint flex cable in the catalogue is listed for the Oppo A6 5G
The original fingerprint sensor flex cable for Oppo A6 5G matches the A6 5G’s side-mounted reader design, the same layout used by the Indian A6 Pro 5G. On the CPH2781, the fingerprint is read by an optical sensor beneath the screen, so this flex cable is suitable for phones that unlock when you touch the side. If your A6 Pro 5G reads fingerprints on the screen, ask us for the correct reference before buying.
Frequently asked questions about ordering replacement parts for the Oppo A6 Pro 5G CPH2781
Are Oppo A6 Pro 4G parts compatible with the CPH2781?
The A6 Pro 4G (CPH2799) has the same 6.57-inch screen size and camera layout, but its processor and motherboard are different. We do not assume that the screen or casing is compatible between the two without checking, so make sure you refer to the model stated in each product name.
Does an A6 Pro 5G purchased outside Europe use the same parts?
If the code is CPH2781, it is the same model: Oppo uses this reference for the same 6.57-inch screen with integrated fingerprint reader in Europe, the Philippines and Brazil. If the code is CPH2827, it is the 6.75-inch Indian model and requires different parts.
Will the fingerprint reader still work after replacing the screen?
On the CPH2781, the optical reader is beneath the panel and reads through it, so it depends on the technology of the replacement panel. Check this information in the product listing and contact us before ordering if you have any questions. A thick glass screen protector can also interfere with reading.
Will the phone remain water-resistant after repair?
Oppo certifies the CPH2781 in Europe as IP68, with testing in accordance with IP69, but this protection depends on the factory seals. After the rear cover or screen has been opened, the same level of protection cannot be guaranteed, even if new adhesive is used.
