Repair parts OnePlus Nord CE5
Receive it on tomorrow tuesday 10 november
This category brings together parts for the OnePlus Nord CE5, launched in 2025: the model with a 6.77-inch AMOLED screen, MediaTek Dimensity 8350 processor and two rear cameras in an oval module. The version sold in Spain and the rest of Europe corresponds to model code CPH2719. Before choosing a part, check this code on your phone, as the Nord CE name has been used across different generations with components that are not compatible with one another.
The European OnePlus Nord CE5 is the CPH2719, and its battery sets it apart from the Indian version
You can find the model code under Settings > About device, in the model section. The CPH2719 is the global variant, fitted with a 5200 mAh battery, while the Indian edition, CPH2717, has a 7100 mAh battery. The parts listed in this category are for the CPH2719, so if you have the Indian variant, we recommend checking compatibility before ordering.
There are two other models that are easy to confuse when looking for parts:
- OnePlus Nord CE 5G (2021), model codes EB2101 and EB2103: 6.43-inch, 90 Hz screen and triple rear camera with a 64 MP main sensor. Its dimensions are different, so neither the screen nor the rear cover will fit the CE5.
- OnePlus Nord 5, model codes CPH2707 and CPH2709: launched at the same time and sharing a similar look, but its rear is made of glass, whereas the Nord CE5 has a plastic rear and frame.
The Nord CE5's 6.77-inch AMOLED panel incorporates the optical fingerprint reader
The factory-fitted screen is a 6.77-inch AMOLED with a resolution of 2392 × 1080 and a 120 Hz refresh rate. On this model, the glass and panel are laminated together as a single unit, so if the outer glass breaks, the complete assembly needs to be replaced. The fingerprint reader is optical and located under the panel, connected to the secondary board, so its operation depends on the screen you install.
We currently offer the complete screen for OnePlus Nord CE5 in Original quality, the premium option, made to the model's specifications, including 120 Hz and fingerprint reader compatibility. After installation, OnePlus's service manual specifies fingerprint calibration through the system's own after-sales calibration menu; without this step, unlocking may fail even if the image and touchscreen work properly. Check the product listing to see whether the part includes a frame, as this affects fitting time and the adhesive material you will need.
The OnePlus Nord CE5's rear is made of plastic, secured with adhesive and does not require a laser
Unlike the Nord 5, the Nord CE5 has both a plastic rear cover and a plastic mid-frame. The cover is secured with double-sided adhesive tape, and the official manual recommends removing it with moderate heat, around 80 °C for 5 minutes, and a suction cup, without a laser or glass separation. This means it can be replaced entirely in any repair shop, as long as the old adhesive is removed and new adhesive is applied to ensure it sits properly.
The complete rear cover with camera frame for Nord CE5 is available in Original quality and comes with the camera module frame already fitted, so there is no need to transfer the oval trim from the broken part. If the cover is in good condition and only the glass covering the lenses is cracked, the rear camera lens compatible with OnePlus Nord CE5, in OEM quality, is the more affordable option and lets you keep the original rear cover.
The OnePlus Nord CE5 features 50 MP cameras with OIS, an 8 MP ultra-wide camera and a 16 MP front camera
Each sensor is sold as a separate module, so you only need to replace the faulty one. All these parts are currently available in Original quality:
- 50 MP main rear camera: Sony LYT-600 sensor with optical image stabilisation (OIS). This is the module that records 4K video at 60 fps and the only rear camera with mechanical stabilisation, so it must be handled with particular care.
- 8 MP ultra-wide camera: second rear camera module, with an f/2.2 aperture, designed for wide-angle shots.
- 16 MP front camera for Nord CE5: Sony IMX480 sensor, the same part number listed in the model's official parts diagram.
OnePlus's service manual states that the cameras must be calibrated after disassembly; otherwise, portrait mode may not apply the blur correctly. Bear this in mind when estimating the cost of replacing any of the three modules, especially if you are carrying out the repair for an end customer.
The Nord CE5's power and volume flex cable is located under the motherboard
In the official Nord CE5 parts diagram, the button flex cable is listed among the last parts to be removed: the motherboard must be released first to access it. This means replacing it takes considerably longer in the repair shop than replacing a camera module, even though the part is small. The power and volume button flex cable for OnePlus Nord CE5 is available in Original quality and combines the power and volume contacts in a single cable.
Four questions about the CPH2719, fingerprint reader and OnePlus Nord CE5 rear cover
Will CPH2719 parts fit the Indian CPH2717?
Both variants share a 6.77-inch screen and exterior design, but the battery is different (5200 vs 7100 mAh). We have not been able to confirm from official documentation that the other components are identical, so if your phone is a CPH2717, contact us with the model code before placing your order.
Why does the fingerprint reader stop working after replacing the screen?
On the Nord CE5, the optical sensor must be calibrated with the new screen using the after-sales calibration menu described in the OnePlus manual. If it still does not respond after calibration, check the sensor connection to the secondary board, which is disconnected during screen replacement.
Is a laser needed to replace the rear cover?
No. The cover is made of plastic and held in place with double-sided adhesive, which softens with moderate heat. Conventional opening tools and new adhesive for reassembly are all you need.
Can you replace only the rear camera glass?
Yes, as long as the cover is undamaged. The lens is sold separately and is the more affordable option; if the rear cover is also broken or deformed, the complete cover already includes the camera frame.
