Repair parts Motorola Razr Ultra 2025

Here you’ll find parts for the Motorola Razr Ultra 2025, the clamshell foldable that Motorola sells outside North America under the name Razr 60 Ultra. It’s the same device with two different names, so the parts in this category fit both. Whether you’re an individual user or work in a repair shop, you’ll find Original-quality replacement parts for two of its most delicate components: the screen and the loudspeaker.

Razr Ultra 2025 or Razr 60 Ultra: how to check that your Motorola is an XT2551

Check the model code, not the product name. All variants of this phone have the XT2551 prefix; only the suffix varies depending on the market: XT2551-1 is the North American variant sold as the Razr Ultra 2025, XT2551-6 is one of the European editions of the Razr 60 Ultra, and units with XT2551-2 and XT2551-3 are also in circulation. For components such as the screen or loudspeaker, the regional suffix does not affect your choice.

To check it on your device, go to Settings > About phone and look for the regulatory information or model and hardware section. The full XT code is shown there. If the phone won’t start, the code is usually printed on the original packaging or shown on the purchase receipt.

The Razr family includes several visually similar models, but their components are not interchangeable:

Take particular care with the Razr+ 2025. It has the same 4-inch outer screen as the Ultra, but its inner screen measures 6.9 inches and is FHD+, so it is not the same device, despite looking very similar.

Which original part to fit in your Motorola Razr Ultra 2025

Two 165 Hz LTPO panels: what the original full screen includes

This model has two screens. The inner one is foldable: it measures 7 inches, uses pOLED LTPO technology, has a resolution of 1224 x 2912 pixels and a variable refresh rate of 1 to 165 Hz. The outer screen, at 4 inches, is also pOLED LTPO at 165 Hz and is protected by Gorilla Glass Ceramic. They are separate components and each is replaced independently.

The original full screen for Motorola Razr 60 Ultra is Original quality. It therefore retains all the features provided by the panel itself: the variable refresh rate, brightness, HDR playback and touch response that the phone had when new. It’s the premium option and the best choice if you want your phone to work as it did before the damage. Before buying, check the product details to see whether it’s the inner or outer panel and, if applicable, check the frame colour to make sure it matches your device.

In this category you’ll also find the original full screen for Motorola Razr 40. It’s designed for the Razr 40 (XT2323), which has a 6.9-inch inner panel and a 1.5-inch outer screen. Choose it if this is your phone model. It is not suitable for an XT2551.

Stereo sound with Dolby Atmos and the original loudspeaker module

The Razr Ultra 2025 features stereo sound with Dolby Atmos, so when one channel fails or distorts, you’ll notice it straight away when playing video or music. The original main loudspeaker for Razr 60 Ultra and Razr Ultra 2025 is the multimedia sound module and is Original quality, so it retains the volume and channel balance calibrated by the manufacturer for this model.

It’s a small part, but replacing it requires opening and resealing the phone. For a repair shop, it’s useful to keep it in stock alongside the sealing adhesives, so the repair can be completed in a single visit.

Titanium hinge, IP48 and other Motorola Razr 60 Ultra details that affect repairs

The phone comes with an IP48 rating, which protects it against particles larger than 1 mm and immersion in water within the limits specified by the manufacturer. This protection depends on the original adhesives and seals. Once the device has been opened, the same level of water resistance cannot be guaranteed, even if the replacement part is original.

The fingerprint reader is located in the side button, not under the screen. So replacing the inner or outer panel won’t affect fingerprint unlocking, a common question on forums.

The hinge plate is reinforced with titanium and is part of the assembly that holds the foldable panel in place. If the inner screen has failed because of an impact on the fold, check the hinge too. If it’s damaged, replacing the panel alone won’t solve the problem.

Frequently asked questions about Motorola Razr Ultra 2025 parts

Are Razr 60 Ultra parts compatible with the Razr Ultra 2025?

Yes. Both share the XT2551 code; only the regional suffix varies. The screen and loudspeaker in this category fit both product names.

Can I install a screen from a Razr+ 2025 or Razr 50 Ultra?

No. These models have a 6.9-inch inner panel, while the Ultra 2025 has a 7-inch panel with a different resolution. They look similar on the outside, but the panels and connectors are not interchangeable.

Will the fingerprint reader work after replacing the screen?

Yes. The sensor is built into the side power button, so it doesn’t depend on the panel. Replacing the screen won’t affect it.

Will the phone still be water-resistant after repair?

This cannot be guaranteed. The IP48 rating depends on the factory seal and, once the device has been opened, water resistance depends on how the new adhesives are applied. We recommend keeping it away from water.

Who is the Razr 40 screen shown in this category for?

It’s for users of the Motorola Razr 40 (XT2323). It’s an original replacement part for that model, with different dimensions and another outer screen, and is not compatible with the Razr Ultra 2025.