Repair parts Motorola Razr 2025
Receive it on tomorrow friday 23 october
This category brings together spare parts for the Motorola Razr 2025, the clamshell foldable that Motorola sells in Europe as the Razr 60. It features two separate screens, a foldable 6.9-inch inner screen and a 3.6-inch outer screen, so choosing the right part depends on which one you need. Whether you’re repairing your own phone or running a repair shop, you’ll find components in Original quality here, with compatibility details provided on each product page.
Razr 2025, Razr 60 or Razr 50: how to identify your Motorola
The Razr 2025 (the name used in North America) and the Razr 60 (in other markets) are the same device sold under two different names. Both belong to the XT2553 model family; the US variant is identified as XT2553-3, and the suffix varies by region. This means that a part listed for the “Razr 60 / Razr 2025” fits both versions.
To check the code on your phone, go to Settings > About phone and look for the regulatory information or the model and hardware section. If the code starts with XT2553, you’re in the right category. If you see a different reference, check this list before buying, as recent Razr generations look very similar from the outside:
- Razr 50 (XT2453 family): previous generation, with the same form factor and similar screen sizes. It’s the model most often confused with the Razr 60, but it has a different reference, so don’t assume the parts are compatible.
- Razr+ 2025: exclusive to North America, with a 4-inch outer screen at 165 Hz. Its screens are not compatible with the Razr 2025.
- Razr Ultra 2025 / Razr 60 Ultra (XT2551): 7-inch inner screen and a different internal design. Its screens are not compatible with this model either.
Two screens on the Motorola Razr 2025: which part do you need?
Before choosing, find out which panel is damaged. The inner screen is a 6.9-inch foldable pOLED, with a resolution of 2640 x 1080 and a refresh rate of up to 120 Hz. The outer screen is a 3.6-inch pOLED at 90 Hz, protected by Gorilla Glass Victus, and is used for notifications, messages or the camera when the phone is closed.
What Original quality preserves
The original complete screen for Motorola Razr 60 is the premium option on the market. As a factory component, it retains the refresh rate, touch response and colour calibration of the original phone, which is especially important for a foldable panel that is used every time the phone is opened. It is supplied as a complete assembly, so it can be replaced as a single unit without separating the glass from the panel.
Before buying, check the product page to see which screen the part is for and compare it with the damaged one in your phone. Also bear in mind that original replacement parts for this model have different references for the inner assembly, depending on the phone’s finish. If you want the frame to match yours, ask us for details before placing your order.
The gyroscope flex cable: an internal part for repair shops
The gyroscope flex cable for Razr 60 and Razr 2025 is also Original quality, and is explicitly compatible with both model names. This small internal component is mainly intended for repair shops that have already diagnosed the fault or are replacing it while the phone is open. As access requires disassembling the phone, it’s best to check first that the fault lies with this flex cable and not another part.
Fingerprint sensor, IP48 and compatibility: what to know when repairing a Razr 60
The Razr 2025 fingerprint reader is built into the side power button, not beneath the screen. In practice, replacing the inner or outer screen does not affect fingerprint unlocking, as the sensor is not integrated into the panel. This differs from other mobile phones where the fingerprint sensor is built into the screen.
The phone comes from the factory with an IP48 dust and water resistance rating. This protection depends on the original adhesives and seals, so once the phone has been opened, the same level of resistance cannot be guaranteed. If this matters to you, bear it in mind when planning the repair and replace any adhesives that are removed.
Finally, always check the compatibility details for each product. The fact that the Razr 50 and Razr 60 have screens of the same size does not mean their parts are interchangeable, so the safest option is to choose components specifically for reference XT2553.
Frequently asked questions about Motorola Razr 2025 spare parts
Do the Razr 2025 and Razr 60 use the same components?
Yes. They are the same phone sold under two different names depending on the market, and both belong to the XT2553 family. Parts intended for either model will fit the other.
Can I fit a Razr 50 screen in my Razr 2025?
We don’t recommend it. Although the dimensions match and the design is very similar, the Razr 50 belongs to a different generation and has a different reference (XT2453). To avoid fitting or operating issues, choose a screen specifically for the Razr 60 / Razr 2025.
Will replacing the screen affect fingerprint unlocking?
It shouldn’t, as the fingerprint sensor is located in the power button, not in the screen. Replacing the panel does not affect this component.
Will it still be water-resistant after repair?
It has an IP48 rating from the factory, but this depends on the original seals. Once the phone has been opened, the same level of protection cannot be guaranteed, even if the adhesives are replaced.
Will Razr+ 2025 screens fit the Razr 2025?
No. The Razr+ 2025 has a 4-inch outer screen and different specifications, so its parts are not compatible with the Razr 2025, which has a 3.6-inch outer screen.
