Repair parts Honor 600 Lite

In this category, you’ll find spare parts for the Honor 600 Lite, the 6.6-inch international variant with a Dimensity 7100 Elite processor that Honor introduced in 2026 under the code LNA-NX1. Almost all the parts listed are Original quality: complete screen, cameras, charging port and speaker. Some cameras are listed under the Honor Magic8 Lite name, so it’s worth checking which parts the two phones share before choosing.

The Honor 600 Lite can be identified by the LNA-NX1 code printed on the back

To check your model, go to Settings > About phone and check the model field, or find the MODEL text engraved on the back of the device. It should read LNA-NX1, the only reference published for the 600 Lite. Honor has not sold it in China, so there is no Chinese variant with a different code that could cause confusion.

The name is what often causes confusion. The Honor 600 without the Lite suffix is a different phone with a different chassis, and the Honor Magic8 Lite is larger. Both Lite models share the same camera setup, which is why they have some camera modules in common, but their screens and bodies are not interchangeable:

The Honor 600 Lite reads fingerprints through its 120 Hz AMOLED screen

The original part is a flat 6.6-inch AMOLED with a resolution of 1200 x 2600 pixels, a 120 Hz refresh rate and 3840 Hz PWM dimming. The key repair consideration is that the fingerprint reader is optical and sits beneath the screen. The sensor needs light to pass through the panel to identify your finger, so replacement quality matters more than it does on a phone with a side-mounted fingerprint reader.

The original complete screen for Honor 600 Lite is made to work with this fingerprint reader and the model’s 120 Hz refresh rate. It is the premium option in the catalogue and is intended for anyone looking for the same panel as the one fitted to the phone. If the phone recognises your fingerprint less reliably after the replacement, register it again in the security settings before assuming there is a fault.

Four replacement parts for the Honor 600 Lite’s 108, 5 and 16 MP cameras

The 600 Lite has a 108 MP main camera with a 1/1.67" sensor and a 5 MP ultra-wide camera on the back, plus a 16 MP front camera. These are the same resolutions as on the Magic8 Lite, which is why the catalogue includes parts listed under both models:

• The original 16 MP front camera is explicitly listed as compatible with the Honor 600 Lite and Magic8 Lite.
• The original 108 MP main camera is listed under the Magic8 Lite name and has the same resolution and sensor size as the 600 Lite camera.
• The original 5 MP ultra-wide camera is also listed under the Magic8 Lite name and matches the resolution of the 600 Lite’s secondary camera.
• The OEM rear camera lens for Honor 600 Lite is the glass that protects the lenses. It is the more affordable option when the sensor works and only the outer glass is scratched or broken.

If photos show smudges or a fixed spot of light, check the outer glass first: if the image improves after cleaning it, replacing the lens is enough. If you’re ordering the 108 MP or 5 MP modules, check with our team that they fit your LNA-NX1, as the two phones have different chassis.

Honor 600 Lite: one USB-C port for charging and wired audio

The 600 Lite’s USB-C 2.0 port supports 45 W SuperCharge

The Honor 600 Lite does not have a 3.5 mm headphone jack, so the port on the bottom handles 45 W SuperCharge fast charging, data transfer and wired headphones. A faulty connector can affect all three functions at once. The original USB charging port for Honor 600 Lite is the factory-fitted part, making it the right choice if you want to keep using your Honor fast charger.

The 600 Lite’s stereo sound comes through the earpiece and the bottom speaker

The model delivers stereo sound asymmetrically: one channel comes through the top earpiece and the other through the main speaker on the bottom edge, which is the louder one. If sound fails during speakerphone calls, music playback and ringtones, but calls still sound clear when you hold the phone to your ear, the bottom speaker is the problem. The original main speaker for Honor 600 Lite replaces that exact part.

The Honor 600 Lite’s IP66 rating depends on the factory seal

The 600 Lite comes with an IP66 rating for protection against dust and water jets. This protection depends on the original adhesives and seals, which are damaged when the phone is opened to replace the screen, port, speaker or cameras. Even if you fit an original part, the phone’s water resistance cannot be guaranteed unless the seal is renewed during the repair.

Fingerprint reader, Magic8 Lite cameras and water resistance: frequently asked questions about the LNA-NX1

Can I fit a Magic8 Lite screen in the Honor 600 Lite?

No. The Magic8 Lite has a 6.79-inch panel and the 600 Lite has a 6.6-inch panel, so neither the dimensions nor the fit in the chassis match. You need a screen made specifically for the Honor 600 Lite and your LNA-NX1.

Will the fingerprint reader still work after replacing the screen?

The 600 Lite’s optical reader reads your finger through the panel, and the complete screen in the catalogue is Original quality, as required by this system. After installation, register your fingerprints again so recognition works correctly.

Why are some cameras listed under the Magic8 Lite name in this category?

Both models use 108, 5 and 16 MP cameras. The front camera is explicitly listed for both models. For the main and ultra-wide cameras, check compatibility with your LNA-NX1 first.

If the USB-C port breaks, will I lose wired headphone functionality too?

Yes, that can happen: the 600 Lite has no headphone jack and also uses USB-C for wired audio. Replacing the charging port restores charging, data transfer and wired audio.