Repair parts Honor 600
Receive it on tuesday 27 de october
Here you’ll find parts for the Honor 600, the mid-range phone Honor unveiled in April 2026, featuring a 6.57-inch AMOLED screen, a 200 MP main camera and a 12 MP ultra-wide camera. The range includes the complete screen, components for the rear camera module and two internal flex cables, almost all in Original quality. As the 600 Pro looks very similar on the outside, check the model code before placing your order.
The Honor 600 has model code VKJ-NX9; the 600 Pro has VKP-NX9
You can find the model code under Settings > About phone. Honor also prints it on the casing, after the word MODEL. If it says VKJ-NX9, you’re in the right category. If you see a different code, look for that model’s category, even if the product name says 600.
It’s easy to confuse the Honor 600 Pro (VKP-NX9) with the 600, as both have the same 6.57-inch screen, the same resolution, the same 7.8 mm thickness and a very similar rectangular camera module. Internally, they’re quite different:
- Honor 600: Snapdragon 7 Gen 4, two rear cameras (200 MP + 12 MP), 80 W wired charging only and weighs 185 g.
- Honor 600 Pro: Snapdragon 8 Elite, a third 50 MP periscope camera with 3.5x optical zoom, 50 W wireless charging and weighs 195 g.
Thanks to that third camera, the Pro’s camera module has a different configuration. And as the processor and charging system also differ, don’t assume that internal parts from one model will fit the other.
120 Hz AMOLED panel and under-display fingerprint sensor in the Honor 600
The Honor 600 comes with a 6.57-inch AMOLED with a resolution of 2728 x 1264 pixels (458 ppi), a refresh rate of up to 120 Hz, 10-bit colour depth and 3840 Hz PWM dimming. Honor specifies peak brightness of 8,000 nits in HDR. The original complete screen for Honor 600 is the only quality we offer for this model, so it has the same panel type, resolution and refresh rate as the original.
This part is particularly important because the fingerprint reader is optical and sits under the screen, near the bottom. The sensor reads your finger through the panel, so unlocking depends directly on the screen you install. With an original part, the reader works with the panel it was designed for. Even so, check that you can register a new fingerprint after the replacement.
The Pro’s screen has the same diagonal and resolution, and some sellers advertise it as compatible with both models. We haven’t been able to confirm that the screens are interchangeable, so the sensible choice is to select the screen for the VKJ-NX9. Also remember that the IP68, IP69 and IP69K ratings apply to the phone as factory-sealed.
The Honor 600’s two rear cameras and protective camera glass
The Honor 600’s 12 MP ultra-wide camera covers 112 degrees
The Honor 600 has two rear cameras: a 200 MP main camera with optical image stabilisation and a 12 MP ultra-wide camera with an f/2.2 aperture, autofocus and a 112° field of view. The original 12MP ultra-wide camera replaces only that second sensor, which the camera app uses when you switch to 0.6x. If the image is faulty only in that mode and the main camera works properly, this is the part you need. The Pro also has a 12 MP, 112° ultra-wide camera, but as its module differs, we haven’t been able to verify that the sensor fits in the same way.
The Honor 600’s OEM rear camera lens lets you avoid replacing intact sensors
If only the glass covering the camera lenses is damaged and your photos are sharp without it, the OEM rear camera lens for Honor 600 is the more affordable option: there’s no need to touch any sensors. It’s designed for the rectangular module with two lenses, which spans almost the full width of the rear panel. The Pro has three lenses, so its glass is different from the 600’s. Before ordering, check the product listing to see how many pieces are included and whether it covers both lenses.
Original flex cables for the Honor 600 VKJ-NX9
The power, volume and AI buttons are on the right edge of the Honor 600
The Honor 600 has volume buttons, a power button and a configurable AI button on the right-hand side, which many users use as a camera shutter button. According to its name, the original power and volume button flex cable is for the power and volume buttons. If the AI button is the one that isn’t working, contact us before ordering to find out whether it’s on the same cable.
The Honor 600 motherboard flex cable is not shared with the Pro
The original motherboard flex cable for Honor 600 is designed for model VKJ-NX9. As the Pro has a different processor and includes wireless charging, its internal layout is different, so you shouldn’t use cables from one model in the other. Before ordering, compare the connectors and shape of the part with the one currently installed.
Frequently asked questions about ordering parts for the Honor 600 VKJ-NX9
Can I fit a screen from the 600 Pro in the Honor 600?
Both screens are 6.57 inches and have a resolution of 2728 x 1264 pixels, but we haven’t been able to confirm that they’re compatible. To avoid fitting issues or problems with the fingerprint reader, choose the screen for the VKJ-NX9.
Will the fingerprint reader still work after replacing the screen?
The Honor 600’s fingerprint reader is optical and reads through the panel, so it depends on having the right screen. The one we offer is Original. After installation, register a new fingerprint to check that everything works correctly.
Will the Honor 600 remain water-resistant after it has been opened?
The IP68, IP69 and IP69K ratings are achieved with the phone sealed at the factory. Once it has been opened, there’s no guarantee that the seal will retain the same protection, and Honor already excludes water damage from its warranty.
If only the camera glass is broken, do I need to replace the camera?
No, not if your photos are sharp in both the main and ultra-wide modes. In that case, you only need to replace the OEM rear camera lens, which costs less than a new sensor.
