Repair parts Google Pixel 9a
Receive it on monday 02 de november
This section brings together Google Pixel 9a replacement parts. Google’s mid-range model was launched in 2025 and features a 6.3-inch pOLED screen, Tensor G4 processor and matte plastic back. You’ll find the screen assembly, G526Q battery, rear covers in all four available colours, front and rear cameras, rear camera lens and smaller components such as the speaker and buttons. Before buying, check the model code and read the notes in each section: for the Pixel 9a, it’s worth keeping in mind how the fingerprint sensor works and how the battery is secured.
Google Pixel 9a: GTF7P international, GXQ96 in the US and G3Y12 in Japan
The Pixel 9a is produced under three regional model codes: GTF7P (international version), GXQ96 (United States) and G3Y12 (Japan). All three refer to the same phone, and Google’s replacement parts for the 9a are listed as compatible with all three variants. You can find the code in the device settings, under the device information section.
The name is what often causes confusion. The Pixel 9 belongs to the same generation, but Google sells its components under their own part numbers, which differ from those for the 9a. In this listing, the only part marked as suitable for both models is the charging port. If your device shows a code other than those three, it isn’t a Pixel 9a and these parts won’t fit.
The Google Pixel 9a has an optical fingerprint reader built into the screen assembly
The original screen is a 6.3-inch pOLED panel with a resolution of 1080 x 2424, a variable refresh rate of 60 to 120 Hz and Gorilla Glass 3. The fingerprint reader is optical and located under the panel, so it is part of the assembly you replace: it does not transfer from the damaged screen to the new one.
The complete screen for Google Pixel 9a is currently available in Original quality, matching the factory-fitted panel, with a refresh rate of up to 120 Hz and an integrated fingerprint sensor. After installation, you need to calibrate the fingerprint sensor using the free software repair tool Google provides for its Pixel phones. Repair forums for the 9a frequently report fingerprint sensors no longer working after a screen replacement, so calibration is the first thing to check.
Google lists the G526Q cell at 5100 mAh typical and 5000 mAh rated capacity
The Pixel 9a battery has the part number G526Q. Google lists a typical capacity of 5100 mAh and a minimum rated capacity of 5000 mAh, so the same part may be labelled with either figure, depending on the manufacturer. The 5000 mAh G526Q battery compatible with Google Pixel 9a matches this reference and is currently available in Premium quality, a compatible alternative that is usually more affordable than Google’s original part.
The adhesive makes this replacement more challenging. The cell is secured to the frame with a large adhesive sheet. It has pull tabs, but these were not enough to remove it in published teardown reports: isopropyl alcohol was needed, and the battery ended up deformed. If you’re a technician, have new battery adhesive ready and allow more time for the repair. If you’re doing it yourself, bear in mind that this is the most delicate repair on the 9a.
The Google Pixel 9a’s plastic rear cover lifts off with heat, no laser required
The Pixel 9a does not have a glass back. It has a matte plastic cover, with the camera module almost flush with the surface, attached to the aluminium frame with adhesive around the entire perimeter. To remove it, simply soften the adhesive with moderate heat, without using a laser. The wireless charging coil sits beneath the side edges, so take care when lifting the damaged cover.
The camera trim is a separate part and can sometimes remain attached to the phone when the cover is removed. That’s why this listing includes the complete rear cover with camera frame, available in two versions:
- Rear cover with camera frame in Iris, Obsidian or Porcelain: currently available in Original quality.
- Compatible rear cover for Google Pixel 9a in Peony: currently available in Premium quality, which is usually less expensive.
Choose the one that matches your device’s colour. For a Peony Pixel 9a, the Premium version is available; for the other three colours, choose Original.
Google Pixel 9a: 48 MP main camera and 13 MP front camera with a 96.1° field of view
The 48 MP main camera for Google Pixel 9a is the wide-angle sensor with optical stabilisation, which the phone uses for most photos. The 13 MP ultra-wide front camera has an f/2.2 aperture and a 96.1° field of view, and is used for face unlock as well as selfies. Both are now available in Original quality.
As the rear module sits almost flush with the cover, a broken lens does not always mean the sensor is damaged. If the camera focuses correctly but the image looks hazy or has spots, the rear camera lens for Pixel 9a may be all you need, without replacing the sensor.
For the Pixel 9a, the USB-C port, speaker and buttons are sold separately
The charging port for Google Pixel 9 and Pixel 9a handles wired charging, which reaches 23 W on the 9a. According to its product details, the same port fits both models. Smaller parts include the main speaker for Google Pixel 9a and the power and volume button, which is now available in Original quality.
Fingerprint sensor, glass and water resistance: common questions about the Pixel 9a
Can I replace only the broken glass on the Pixel 9a screen?
In this listing, the screen is sold as a complete assembly: the glass, pOLED panel and fingerprint sensor come joined together. Even if the image still looks fine, the entire assembly is replaced.
Why does the fingerprint sensor stop working after a screen replacement?
The optical reader comes with the new screen and needs to be calibrated for the Pixel 9a to detect it correctly. Google provides a free software repair tool with a section for calibrating the under-display fingerprint sensor. Without this step, fingerprint recognition may fail even if the screen has been fitted correctly.
How can I check the parts before closing the phone?
The Pixel 9a includes a repair diagnostics app. To open it, dial *#*#7287#*#* on the phone’s keypad. This lets you check the components before sealing the device with new adhesive.
Does the Pixel 9a retain its IP68 rating after a repair?
This cannot be guaranteed. The 9a leaves the factory with an IP68 rating, but opening the phone breaks the original adhesive seals. Even if new adhesive is applied, there is no guarantee that the device will retain the same level of water resistance.
