Repair parts Google Pixel 10 Pro Fold
Receive it on monday 02 de november
This category brings together spare parts for the Google Pixel 10 Pro Fold, the foldable phone Google launched in August 2025 with a Tensor G5 processor, IP68 rating and gearless hinge. It has two screens, two battery cells and two front cameras, so it is worth checking which half of the phone is affected before choosing a part. Currently, almost all the parts listed are available in Original quality, the rear camera lens in OEM quality and the battery in Premium quality.
Google Pixel 10 Pro Fold: GM66V and GU0NP models, different from the Pixel 9 Pro Fold
Google’s spare parts for this foldable phone are listed under two model codes, GM66V and GU0NP, and the same part number fits both. You can check yours under Settings > About phone > Regulatory labels: the code appears at the top of that screen.
Most mix-ups happen with the Pixel 9 Pro Fold, which looks almost identical from the outside and has the same camera resolutions. However, there are clear physical differences: its outer screen measures 6.3 inches, compared with 6.4 inches on the Pixel 10 Pro Fold; its battery is 4650 mAh and, when folded, it is 10.5 mm thick compared with 10.8 mm. If About phone shows Pixel 9 Pro Fold, these parts are not for your device.
The Pixel 10 Pro Fold has two OLED panels: a 6.4-inch outer screen and an 8-inch foldable inner screen
Outer side: 6.4-inch Actua at 60–120 Hz
The complete outer screen for the Pixel 10 Pro Fold is a 6.4-inch OLED panel with a resolution of 1080 x 2364 pixels, an adaptive refresh rate of 60 to 120 Hz and Gorilla Glass Victus 2. It is currently available in Original quality. This is the most affordable screen repair for the model, as the outer panel is replaced from the front and the foldable section is not affected.
The Pixel 10 Pro Fold’s fingerprint reader is located in the side power button, not in either of the screens. So when choosing a panel, you do not need to check whether it supports an under-display fingerprint reader, which is relevant when choosing parts for other Pixel phones.
Inner side: 8-inch Super Actua Flex at 1–120 Hz
The original foldable inner screen is an 8-inch LTPO panel with a resolution of 2076 x 2152 pixels and a variable refresh rate of 1 to 120 Hz. It is the most expensive part of the phone and the most complex to replace: Google’s service replacement panel comes mounted on the frame, and all the internal components must be transferred to the new frame.
Before ordering, bear in mind a detail specific to this model: the batteries are so firmly bonded that the repair documentation states they will be damaged during removal and must not be reused. If you are replacing the inner panel, factor in a new battery too, and check the product listing to see whether the screen includes a frame.
5015 mAh split across two cells: the Pixel 10 Pro Fold uses GU46C and G3M28
The Pixel 10 Pro Fold has a typical capacity of 5015 mAh, split between one cell in the base half and another in the folding half, identified as GU46C and G3M28. According to the repair guides, both must be replaced at the same time, so the repair involves opening both halves of the phone, not just one.
The 5015 mAh battery compatible with Google Pixel 10 Pro Fold is listed with both cell codes in its name and is currently sold in Premium quality, a compatible option that usually costs less than the service part. Each cell is secured with stretch-release adhesive strips and pull tabs, so you will need new adhesive for installation. If the issue coincides with a broken inner screen, order the battery at the same time, as that repair already requires new cells to be fitted.
The Pixel 10 Pro Fold’s rear cover is bonded and connected by a cable
The back is made of Gorilla Glass Victus 2 and is secured to the frame with adhesive around the entire edge, so it can be removed without a laser. One distinctive feature of this model is that the cover has a cable connected to the inside next to the power button. Bear this in mind when estimating the work, as the connector must be disconnected and plugged back in when reassembling the phone.
The complete rear cover in Original quality replaces the entire back panel. If only the glass protecting the rear camera module is cracked (48 MP main, 10.5 MP ultra-wide and 10.8 MP telephoto with 5x optical zoom), the OEM rear camera lens is the more limited and affordable option. Check what each listing includes before choosing between them.
The Pixel 10 Pro Fold has a 10 MP front camera in each half
Although both are 10 MP, they are different modules, each located in one half of the phone. The 10 MP outer front camera is above the outer screen and has autofocus. The front camera integrated into the inner panel is used when the phone is open. Before ordering a part, check which one is faulty by opening the camera app in each mode.
For less serious faults, the listings include the Pixel 10 Pro Fold earpiece speaker, the volume button flex cable and the gyroscope flex cable, all currently available in Original quality. On this model, the power button with fingerprint reader sits above the volume buttons on the same side. Check the flex cable listing to see which buttons it covers before ordering.
Frequently asked questions about the Pixel 10 Pro Fold before repair: codes, cells and fingerprint reader
Are GM66V parts compatible with GU0NP?
Yes. Google’s service parts for the Pixel 10 Pro Fold are listed as compatible with GM66V and GU0NP under the same part number. Just make sure your device is not a Pixel 9 Pro Fold.
Can I replace just one of the two battery cells?
The repair guides state that both cells must be replaced together. This keeps wear consistent across both halves and avoids having to open the device again later.
Will I lose the fingerprint reader when replacing the outer screen?
The fingerprint reader is located in the power button, not in either panel. Google also provides an online repair tool that can update the software and calibrate the fingerprint reader after a repair, if needed.
Can I use Pixel 9 Pro Fold spare parts?
It is not recommended. The outer screen has different dimensions (6.3 compared with 6.4 inches) and the battery has a different capacity and different part numbers. Always choose parts specifically for the Pixel 10 Pro Fold.
