Repair parts Google Pixel 10
Receive it on tuesday 27 de october
Here are the replacement parts for the Google Pixel 10, the base model in the range launched by Google in August 2025 with a Tensor G5 processor and a 6.3-inch screen. We stock the complete screen, battery, cameras, charging port, flex cables and speaker for models GK2MP, GL066 and GLBW0. Before placing your order, check your phone’s model code: the Pixel 10 Pro has the same screen size, but not all its parts are compatible.
Google Pixel 10: model codes GK2MP, GL066 and GLBW0, and differences from the Pixel 10 Pro and Pixel 9
Google registered the Pixel 10 under three model codes: GK2MP, GL066 and GLBW0. All three refer to the same phone, and the parts in this category fit any of them. To check yours, go to Settings > About phone > Regulatory labels: the code is shown at the top.
It’s easiest to get confused with related models. The Pixel 10 Pro also measures 6.3 inches, but its screen resolution is 1280 x 2856 pixels, compared with 1080 x 2424 for the Pixel 10, so the panels are not interchangeable. The Pixel 9, meanwhile, has the same external appearance but only has two rear cameras. The Pixel 10 adds a 5x telephoto lens, so its camera module and surrounding frame are different.
Google Pixel 10: 1080 x 2424 OLED at 120 Hz with an ultrasonic fingerprint reader beneath the panel
The original complete screen for Google Pixel 10 replaces the glass, touch layer and 6.3-inch OLED panel as a complete assembly. The original panel operates at between 60 and 120 Hz and reaches a peak brightness of 3000 nits. It’s currently available in Original quality, the highest-grade option on the replacement parts market.
An ultrasonic fingerprint reader sits beneath the panel. After replacing the screen, Google says you need to connect the phone to its Pixel Update and Software Repair web tool to calibrate the sensor. If you skip this step, the fingerprint reader may not work even if the image and touch functions are working correctly. Calibration is done entirely through software, so you don’t need to buy any additional parts.
On this model, the screen is bonded to the frame with very strong adhesive. This makes it the most delicate repair on the Pixel 10, so it’s best to have new adhesive ready before you start.
Google Pixel 10: 4970 mAh G20M7 battery that can be replaced without removing the screen
The 4970 mAh G20M7 battery compatible with Google Pixel 10 is the right one for all three model codes. It’s currently available in Premium quality, a compatible option at a lower cost than Google’s part. The Pixel 10 Pro uses a different battery, so check that the reference G20M7 matches the one in your phone.
The original cell may show 4835 mAh. This is normal: Google lists 4970 mAh as the typical capacity and prints 4835 mAh as the minimum guaranteed capacity. They are not two different batteries.
For this generation, Google changed the fastening system. The battery sits in a sleeve with a green pull tab and adhesive that is less strong than in most phones. It’s also accessible from the back, which lifts off without applying heat. This makes it one of the easiest repairs on the Pixel 10. Once installed, Google recommends completing a charge and discharge cycle so the system can accurately calculate the capacity.
Pixel 10: 48 MP sensor, 13 MP ultra-wide camera and two versions of the front camera
The Pixel 10 replaces the Pixel 9’s 50 MP sensor with a 48 MP one, so the cameras in the two models are not interchangeable. These are the references available in the listing, currently in Original quality:
- 48 MP main camera for Pixel 10: the wide-angle sensor, used most frequently.
- 13 MP ultra-wide camera: the wide-field sensor, sold separately from the main camera.
- 10.5 MP front camera for Google Pixel 10: Google makes two different references depending on whether the phone is 5G mmWave or Sub6. If your phone is an import, check the variant before ordering.
- Rear camera lens and frame in Glacier Blue or Obsidian: this is the part you need if only the glass is broken and the sensors still work. Choose the colour that matches the back of your phone.
On the Pixel 10, the USB-C port, speaker, button flex and antenna can be replaced as separate parts
The original USB-C charging port for Pixel 10 is modular: it comes on its own board and can be replaced without touching the motherboard, which houses the Tensor G5. The same applies to the original main speaker, which can also be replaced separately.
For the side buttons, there’s the power and volume button flex cable, which is exclusive to this model. The antenna flex cable for Pixel 10 and Pixel 10 Pro is the only part in the listing that, according to its reference, fits both phones. It’s useful if you run a repair shop and work with both models.
Answers about calibration, compatibility and Google Pixel 10 versions
Will a Pixel 10 Pro screen work in a Pixel 10?
No. Both are 6.3 inches, but their resolution and connections are different. For models GK2MP, GL066 and GLBW0, you need the screen made specifically for the Pixel 10.
Will the fingerprint reader work straight away after replacing the screen?
It may not. Google recommends connecting the phone to Pixel Update and Software Repair to recalibrate the ultrasonic reader. Then register your fingerprints again.
Why does my battery show 4835 mAh instead of 4970 mAh?
These are two figures for the same G20M7. The first is the minimum capacity and the second is the typical capacity stated by Google.
Do I need to remove the screen to replace the Pixel 10 battery?
No. On the Pixel 10, the battery is accessed from the back and removed using the green pull tab, without taking out the panel. This means you don’t have to detach the screen, which is the most delicate part.
