Premium Full Screen with Frame for Samsung S25

📱 Premium-quality screen with frame for Samsung Galaxy S25: make your phone look like new again

The Samsung Galaxy S25 is an impressive phone: compact and lightweight at just 162 g and 7.2 mm thick, with a powerful Snapdragon 8 Elite. That’s why it’s so frustrating when a drop leaves the glass shattered. This premium-quality full screen with frame lets you bring your phone back to life without having to replace it. 🙌

It’s the perfect replacement part if your phone slipped out of your pocket, landed corner-first on the pavement or took a knock that damaged the display. It’s also a great choice if the frame has been dented or bent as well as the glass.

🔍 How to tell if your Samsung Galaxy S25 needs a new screen

Sometimes the damage is obvious, while in other cases it gradually gets worse. Here are the most common signs:

• 💥 Broken glass or cracks that continue to spread without any further impacts.
• ⚫ Ink-like black spots that grow over time, even when the glass is intact.
• 🌈 Green, pink or black lines, either vertical or horizontal, or unusual colours near the edges.
• 👆 Touchscreen issues: unresponsive areas, typing delays or ghost touches.
• 💡 Flickering at low brightness or an image that remains on screen and won’t disappear.
• 🖤 Black screen even though the phone still rings or vibrates.

Before ordering, try a quick check: restart the phone, update the software, remove the screen protector for a few minutes, and run the touchscreen and display tests in Samsung Members diagnostics. If the issue persists, it’s likely time to replace the part.

🛠️ Premium screen with frame for Galaxy S25: what this part includes

The screen panel and frame come pre-assembled as a single unit. This saves you from the most delicate part of the repair: separating an ultra-thin panel from its original chassis. You’ll also get a fresh frame if yours was badly damaged.

• ✅ Quality: Premium.
• ✅ Type: Full screen with frame included.
• ✅ Colour: Silver.
• ✅ Model: Samsung Galaxy S25 S931B.
• ✅ Gross weight: 130 g.

🔐 Screen not compatible with the fingerprint reader

Please note: this screen for the Samsung Galaxy S25 is not compatible with the fingerprint reader integrated into the display. Once installed, you can unlock your phone using a PIN, pattern, password or facial recognition.

🇪🇺 Replacement part for Samsung Galaxy S25 S931B, European version

This replacement part is designed for the European version of the Galaxy S25, identified by model code S931B. To check your model, go to Settings > About phone or look at the original box. This is the 6.2-inch model, with a resolution of 2340 x 1080 and dimensions of 146.9 x 70.5 x 7.2 mm. The silver colour looks great with the range’s understated finish.

🔧 How to replace the Samsung Galaxy S25 screen, step by step

This model is repaired from the back, with the internal components transferred from the original chassis to the new one. Have gentle heat, a suction cup, opening picks, a Phillips screwdriver, a nylon spudger, isopropyl alcohol and fresh adhesive ready, and allow 90 to 120 minutes.

1. Prepare the phone: with the battery below 25%, switch it off and remove the SIM tray.
2. Remove the back cover: apply heat around the edges to soften the adhesive, then separate the cover using the suction cup and opening picks.
3. Remove the screws: there are 20 screws, split between the top and bottom sections. Set aside the wireless charging and NFC coil, along with the speaker.
4. Disconnect the battery first: then disconnect the interconnect flex cables, the screen flex cable and the camera flex cable.
5. Remove the components: the motherboard, lower module with the charging port, cameras and battery.
6. Test the new screen: connect its flex cable to the motherboard without removing any films or labels, and avoid bending the cable by more than 90°. If it powers on normally, you can continue. If it doesn’t start, contact us before installing it.
7. Transfer everything to the new frame: fit the lower module, motherboard and battery using new adhesive, then reconnect the battery last.
8. Close the phone and check it: attach the back cover with pre-cut adhesive and test the touchscreen, brightness, sensors, cameras, speakers and charging.

💡 Since you’ll need to remove the battery, this is the ideal time to fit a new one (model EB-BS931ABY, 4000 mAh).

🚀 Why it’s worth replacing your Samsung Galaxy S25 screen

Your phone is still a powerhouse under the hood: Snapdragon 8 Elite, 12 GB of RAM, a 50-megapixel main camera, 8K video, Wi-Fi 7 and AI features with Gemini Live. What’s more, it has 7 years of updates ahead of it, so it would be a shame to retire it because of a broken screen. With this premium replacement part from iLevante, your Galaxy S25 will be ready for action again. 😎