The TFT screen of the Samsung A31 does not include/is not compatible with the fingerprint reader
How can I easily change the Samsung A31 Screen
First of all, you will need the right tools for this job. You need a low-temperature heat gun which will serve to separate the broken display from the smartphone. Also, you must have a pick to do the job of separating the Samsung A31 Screen by exerting precise force, bearing in mind that it must be meticulous. And also, you will need a soft cotton cloth.
On the other hand, the display that you will receive will come very well packaged, so you need to remove it from the package very delicately. Once you have all the tools and the screen, I will show you everything you need to do.
- Before starting, it is essential and important that you remove the battery
- Make sure you have no static electricity. For this, it is good to have an antistatic bracelet and wear shoes that disperse static electricity.
- To separate the module from the smartphone, you need something that generates heat, such as a hairdryer or a heat gun at 120°, never use one that exceeds 120° because otherwise, you will melt the essential chips.
- You have to apply heat to the corners so that the adhesive dissolves. To completely remove the screen you can use a pick, which is part of the necessary toolset for changing.
- Then continue applying heat, but in the center of the phone, do it carefully and quickly so as not to damage the battery (it is ideal to remove it).
- When you finish removing it, be very careful, as you will disconnect the damaged screen from the motherboard. Look very carefully at how the screen is attached, there should be a small chip.
- When removing it, clean the area very well with the soft cloth to remove all the adhesive that remained. You can use liquids that were made for this purpose, but if you could not find these liquids do not use water as it will damage most of the components, just use the soft cloth.
- We are almost finished, now connect the new display to the base module and connect the chip that the smartphone has from the factory.
- Now you just have to put the new Samsung A31 screen.
You have finished, you have the new display on your device. Do not forget to place the power source and test its performance.
How much does the Samsung A31 screen cost?
The total is specified above (19.90€), only the shipping cost will be added. VAT is already included in the purchase.
Do I need to go to the official service center
No, it is not necessary, because we will teach you to install it yourself with all the necessary care and you will see what tools are essential to have. This way you will be able to change the screen (model SM-A315F, SM-A315F/DS) safely and you will also be able to save a considerable amount of money.
Original options and recommendations from Samsung Galaxy A31
Now that you have your new screen installed, you certainly want to take care of it so that it does not break again.
There are many accessories to protect your phone, the most used are the cases that withstand severe impacts and protect the edges of your smartphone.
Next are the tempered glass that are installed with an adhesive that comes with them, they are very easy to install. They also withstand many falls, have the advantage of cracking sometimes, but the new screen of the cell phone will not be damaged. A very interesting novelty that came to the market is the tempered liquid, this liquid acquires greater resistance to falls and scratches much less than the high-impact glass.
In addition, there are accessories that are very useful. One of these was created to be placed in the cases of smartphones and allows holding it with a ring over our hand.
How to find out if I have a broken screen
Before concluding that it is completely defective, it is important to know if it is the film protector or the touch that is damaged.
If the touch is defective we will notice by seeing the top part shattered but the screen continues to be displayed normally. But the LCD will become unusable if the smartphone stops working, that is, if only a part is visible, vertical lines appear or everything is black. To finish verifying that we must repair it, go to settings. Then, to "About the phone" and tap 7 times on "build number". This gives you access to the "developer options".
Inside this item, select "pointer location", and draw lines all over the screen. If they are not drawn, it means that there are problems and you have to change it.
