How can I change the Huawei P Smart 2020 Screen
Here I explain in a simple, intuitive, and reliable way, how to replace the damaged module of the mobile phone in just four steps. But before you start, make sure you know the features of your mobile.
The first thing you should do is place the phone face down. Remove the back cover, the battery, and you will see some screws, remove them.
The second step is to carefully separate the screen's flex cable. Do it carefully as the Flex can be damaged. To realize this, you will see that it is a small socket. With a small flat screwdriver, apply some pressure and it will pop out on its own.
The third step would be to remove the broken screen, for this we will use two tools:
- Heat: for this you can use a heat gun, not exceeding 120°C. Administer it all around
- A plastic pick: apply pressure between the touch and the frame.
- Finally, place the screen (previously remove impurities) and connect the cables in the same way. Now all that remains is to place the screws and the cover.
What is the price of the Huawei P Smart 2020 Screen?
The price is the one stated at the top (20.90€). In addition, this price comes with a unique discount, so take advantage of this promotion that will not be valid for long. Another point to note is that taxes are included in the price, so you do not have to do the math.
What color or colors are available?
Only black displays come from the factory because the screen occupies the entire front of the mobile and does not have any kind of frame, even if your mobile phone is of color.
Do I need to go to the original technical service
It is normal to feel intimidated by something you have never done, but remember that there are no secrets to this task. Many books and manuals have been published on how to exchange the module of your smartphone.
On this page, I will explain how to do it yourself for a ridiculous price of 20.90€. Make sure to read it from top to bottom, do not try to skip any section as that will depend on the success of your effort. If necessary, read it over and over again. So the answer is: no, it is not necessary to take it to a technician. You can do it!
Can I replace this screen for Huawei P Smart 2020
Our goal will always be your well-being and being able to solve everyday life problems. Next, I will reveal how you can tell if your screen has suffered a blow and if it is necessary to make a replacement, and if it is essential, we have already indicated how to fix it in simple steps (with a surprise). Without further ado, eliminate any distractions and pay close attention to all the steps and... get to work!
Different original recommendations from Huawei P Smart 2020
First of all, what you would do, put a glass that adheres to the screen, and it secures it from scratches or scuffs. The thickness of the protective film usually ranges between 0.3 to 0.5 mm and its function is to act as a shield against any fall from 1 meter. The qualities vary, also their price, but it is still very economical. And you can change them yourself with ease every time it has a scratch or has been shattered. Thus, only the protective film will break and the screen of your smartphone will continue without damage.
In addition, we encourage you to put on a silicone protector that reduces the impact of the fall avoiding greater damage. And it protects the edges. Among the most used cases are those that have a margin that is a few millimeters above the module, since when it hits the ground it does not hit.
Another option, and which is all the rage right now, is the wallet-like case. Not only can we carry our smartphone with style, but we also avoid dropping it.
How to know if the screen is broken
Before concluding that it has stopped working completely, we must understand if it is the protective film or the Huawei P Smart 2020 screen that is broken.
If the touch fails we will realize by seeing the top part broken and yet, the display continues to work normally. But the screen will be damaged if the Huawei P Smart 2020 stops working, that is, if only a section is seen, horizontal lines appear or everything is dark. To finish verifying that we must change it, go to settings. Then, to "Phone information" and press 7 times on "build number". This way the "developer options" are activated.
Within this item, select "pointer location", and outline over the entire screen. If these are not seen, it means that it has problems and you must replace it.
