Screen Replacement for Xiaomi Redmi Note 10 Pro
Here I show you in a simple, practical way and without complications, how to change the screen that has stopped working of the Redmi Note 10 Pro in just four steps. But before you start make sure you know how your Xiaomi is assembled.
The first thing you should do is place the phone with the LCD facing down. Remove the back cover, the battery, and you will see some screws, remove them.
The second step is to carefully remove the Flex cable that connects the module to the motherboard as the Flex can break. To realize this you will see that it is a small tab. With a small flat screwdriver, apply some pressure and it will pop out on its own.
Now you must do the following: remove what broke, for this we will need to use two tools:
- Heat: for this we will use a heat gun, which should not exceed 120°C. Do it around the contour
- A plastic pick: apply pressure underneath it.
- Finally, place the screen (previously remove impurities) and connect the cable in the same way as they were. Now all that remains is to put the screws and the back cover back on.
How much does this screen cost?
The price is the one stated at the top (18.50€). In addition, this price comes with an excellent discount, so take advantage of this offer that ends. Another point to consider is that taxes are included in the total price, so you do not have to do any calculations.
What colors are available for sale?
For now, there is only black color for all Xiaomi Redmi Note 10 Pro (including the color one). Because this model does not have any kind of border.
Should I go to the original service
It is normal to feel overwhelmed if you have never done this, however, remember that there are no tricks for this task. Many books and tutorials have been released on how to replace the module of your Redmi Note 10 Pro(M2101K6G).
In this post we will see how to do it yourself with a minimal investment of 18.50€. Make sure to read everything, do not try to skip any paragraph because your success depends on it. If necessary, read it repeatedly. So the answer is: Not at all to send it to a technician. Stay calm, it's simple!
Can I repair this screen for Xiaomi Redmi Note 10 Pro myself?
Have you now purchased our displays? Now you have control. You just need to be calm and fully focused at this precise moment. Our goal will always be that you can save the cost of labor.
Do not get discouraged when you go through a moment like this. Always keep in mind that everything is possible if when fixing your electronic device you do it with great calm. Thus, you will not cut any important board of the Xiaomi Redmi Note 10 Pro that later costs you more to fix it or that it is impossible to find the module.
Some tips for Redmi Note 10 Pro
Of course, we would like the modules to be durable, but the truth is that, in a neglect, a blow, can end with our screen shattered.
That's why, the best advice is: spend on a case. The cases work really well.
Many people tend to lend their smartphone and there is no doubt that no one will take care of your Redmi Note 10 Pro as well as you. If you do not want someone else to damage it, save yourself that pain and do not lend it unless it is an emergency.
Every time you plug your phone into the electrical outlet, choose a safe place where no one can knock it over while it is charging. This way you will avoid fractures that make you spend money.
One last tip, if you want to extend the durability of your mobile phone, it is better that children do not play with the phone. If they want to have fun, in the online sales sites they offer at a very good price, technological devices adapted to the needs of our children.
How to know if I need to change the screen
Before concluding that it stopped working completely, it is important to understand if it is the tempered glass or the Xiaomi Redmi Note 10 Pro Screen that is defective.
If the touch starts to fail we will notice by seeing the exterior cracked and yet, the display continues to be projected normally. But the screen will become unusable if the mobile stops working, that is, if only a section is visible, horizontal lines appear or nothing is displayed. To finish checking that we must put another one, go to settings. Then, to "Phone information" and press 7 times on "build number". This gives you access to the "developer options".
Within this item, select "pointer location", and outline the entire screen. If these are not drawn, it means that it has problems and you must repair it.
