This screen is compatible with the models
Xiaomi Redmi K40, Xiaomi Redmi K40 Pro, and Xiaomi Redmi K40 Pro+
How can I change the Screen for Xiaomi Poco F3
In this article, I show you in a simple, intuitive, and uncomplicated way, how to replace the unusable lcd of the mobile in a list of four steps. But before attempting anything make sure you know how your Xiaomi is assembled.
The first thing you should do is place the phone face down. Remove the back cover, the battery, and you will see some screws, remove them.
Also as a second step, disconnect the screen Flex. Do it carefully as the Flex can be cut. To identify it you will see that it is a small socket. With the plastic lever, apply a little force and it will pop out by itself.
The third step would be to remove the broken module, for this, we will need to use two accessories:
- Heat: for this we will use a heat gun, which should not exceed 120°C. Manage everything around
- A plastic pick: apply pressure between the screen and the frame.
- Finally, place the new screen (previously remove any remaining adhesive) and connect the cables as they were. Now you just have to put the screws back and the back cover.
What is the price of the screen?
Although on Internet sales sites prices increase by the day, we have retained the same price of 20.45€, which is shown at the beginning. It's your chance to take advantage of this offer now. The price includes taxes, only the cost of shipping will be added to the total, which will depend on the area where you live.
What color or colors does the screen have?
For your Xiaomi color, the display model you are needing only has black edges, because it is a piece that covers the entire contour of the smartphone. Thus, you don't have to be trying to choose between many colors.
Do I need to go to the original service
No, it is not necessary, because we are going to teach you how to install it yourself with all the care it requires and you will see what tools are essential to have. This way you can change the module (model) quickly and you will also be able to save a significant amount of your money.
Will I be able to fix this Xiaomi Poco F3 Screen myself?
Our goal is focused on your satisfaction and being able to help you with the problems of everyday life. Next, I will show you how you can tell if your screen has suffered some broken pixels and if it is necessary to make a change, and if necessary, we have already shown you how to repair it in simple steps (with a gift). Now, eliminate any distractions and pay close attention to each of the items and... get to work!
Some original recommendations
Of course, we would be happy if screens were unbreakable, but that would be spectacular. The truth is that, in a moment, a fall, can end up with our screen shattered.
Therefore, we always say, the best advice is: invest in a case. Cases fulfill their purpose very well.
Many people tend to lend their mobile and there is no doubt that no one will protect your mobile as well as you. If you don't want someone else to damage it, save yourself that sadness and don't lend it unless it's an emergency.
Whenever you plug your mobile into the electrical outlet, place it in a safe place where no one can handle it while it is recharging. This way you will avoid unnecessary bumps.
And finally, if you want to extend the life of your phone, it's better that children do not play with the mobile. If they want to play, online stores offer at a good price, technological devices adapted to the needs of our children.
How do I know if I need to change the screen?
Before concluding that it has stopped working completely, it is important to understand if it is the tempered glass or the Xiaomi Poco F3 Screen that is broken.
If the touch starts to fail we will know by noticing the top cracked but the lcd still looks normal. But the lcd will be broken if the smartphone stops working, that is, if only a section is visible, vertical lines appear or nothing can be done. To finish verifying that we must place another one, go to settings. Then, to "Phone information" and tap 7 times on "build number". This way the "developer options" are activated.
Inside this item, select "pointer location", and draw lines all over the screen. If they are not represented, it means that it is damaged and you must replace it.
