Changing the Screen for Xiaomi Mi 10T 5G Easily
Here we will explain in a simple, intuitive, and reliable way, how to replace the unusable screen of the Smartphone in just 4 steps. But first, to start, make sure you know the features of your phone.
The first thing you have to do is place the phone with the screen facing down. Remove the back cover, the battery, and you will see some screws, remove them.
Also, as a second item, disconnect the screen Flex. Do it carefully as it can be cut. To identify it, you will see that it is a small connector. With a small flat screwdriver, apply a little force and it will pop out by itself.
The third step would be to remove the broken module, for this we will use two tools:
- Heat: for this we will use a hairdryer, not exceeding 120°C. Apply it all around
- A plastic pick: apply pressure between the module and the casing.
- Finally, place the new screen (first clean the adhesive residue) and connect the cable in the same way as before. Now all that remains is to place the screws and the cover.
-
How much does the screen cost?
The price is the one mentioned at the top (23.90€). In addition, this amount is special because it includes a special offer, so take advantage of this promotion that is ending. Another point to note is that VAT is included in the price, so you do not have to pay extra.
What color or colors are available?
There are only black screens available from the factory because the screen covers the entire front of the phone and there is no type of frame, regardless of whether your smartphone is colored
Do I need to go to the official technical service
Not at all, because we will guide you so that you can install it yourself with all the necessary care and we will reveal which tools are essential to have. This way you can change the display (model M2007J17G / M2007J17C) safely and also save a significant amount of your money.
It's easy to replace this Xiaomi Mi 10T 5G screen
Rest assured that it is! We have already explained the steps that need to be done quickly and effectively so that your Xiaomi Mi 10T 5G works again. Now, we will show you how to know if the screen of your smartphone has stopped working.
If you follow the items there will be no problems. You will be able to solve the issue without going to an official service and in a few steps.
Xiaomi Mi 10T 5G tips
First of all, what you should do is apply a screen protector that sticks to the screen, and prevents scratches or marks. The thickness of the screen protector usually ranges from 0.3 to 0.5 mm and acts as a shield against any fall from 1 m. The qualities vary, as does their cost, but it remains very economical. And you can apply it yourself easily whenever it has a crack or is completely broken. Thus, only the glass will break and the module of your phone will be unharmed.
Also, we encourage you to put on a silicone case that reduces the impact of the fall, minimizing further damage. And it protects the edges. One of the most used cases are those that have an edge that is a few millimeters above the touch, so that when it falls to the ground it does not hit.
Another suggestion, and what is a trend right now, is the case that simulates a sling bag. Not only will we carry our phone with a decoration, but we also avoid it being stolen.
How to diagnose if you have a damaged screen
Before concluding that it has stopped working completely, it is important to check if it is the tempered glass or the screen that is damaged.
If the touch starts to fail we will notice it when we see the exterior broken but the screen continues to work normally. But the Xiaomi Mi 10T 5G Screen will be damaged if the phone stops working, that is, if only a section is visible, vertical lines appear or nothing can be seen at all. To finish confirming that we need to replace it, go to settings. Then, to "About phone" and click 7 times on "build number". This will activate the "developer options".
Inside this item, select "pointer location", and draw lines all over the screen. If these are not displayed, it means that it is defective and you need to replace it.
