Complete screen for Xiaomi 14 Ultra

Premium-quality Xiaomi 14 Ultra screen (6.73") – Ref. 24031PN0DC / 24030PN60G

That moment when your Xiaomi 14 Ultra slips from your hand in slow motion and lands screen-first… 😱 We have all been there. If, after turning it over, you find a spiderweb of cracked glass, marks or a touchscreen with a mind of its own, do not worry: here is the Premium-quality replacement screen for the Xiaomi 14 Ultra, designed to get your phone back to normal without costing you a fortune.

This replacement part is compatible with the technical references 24031PN0DC and 24030PN60G, corresponding to the Xiaomi 14 Ultra launched by the brand in 2024. It features a 6.73-inch panel designed to fit Xiaomi’s flagship camera phone. Before purchasing, check your phone’s reference in Settings > About phone to make sure it is the right part. 😉

📋 Quick specifications of the Xiaomi 14 Ultra screen

Why choose a Premium screen for your Xiaomi 14 Ultra?

Let’s be honest: if you own a Mi 14 Ultra, you appreciate things that are well made. You did not buy an ordinary phone, so you should not settle for an ordinary replacement part either. Premium quality is the right choice if you are looking for clear viewing, a smooth and responsive touchscreen and a carefully finished product, at a much more reasonable price than an official repair.

With this screen, you can get back to:

• 📸 Looking through your photos with vivid colours and a high level of detail.
• 🎬 Watching series and videos with a sharp, enjoyable image.
• 👆 Typing, swiping and gaming with a precise touchscreen that responds when you need it to.
• ☀️ Using your phone every day with appropriate brightness in most situations.

In short: your Xiaomi 14U is back in the game, ready for another season of photos, messages and series marathons.

Signs that your Xiaomi 14 Ultra needs a new screen

Not all screen faults are immediately noticeable. Sometimes the glass is intact, yet the panel is clearly asking to be replaced. Look out for these signs:

1. Cracked or chipped glass: the most obvious sign. As well as looking unsightly, the edges can cause cuts and the crack will usually spread over time.
2. Unresponsive or erratic touchscreen: ghost touches, dead zones or apps opening by themselves. 👻
3. Black, green or purple marks that gradually spread from the point of impact.
4. Vertical or horizontal lines running across the screen.
5. Black screen even though the phone rings, vibrates and receives notifications.
6. Flickering or unusual brightness changes for no apparent reason.

If your Xiaomi 14 Ultra has any of these symptoms, the problem is most likely in the screen assembly, and replacing it should solve the issue. 🛠️

Replacing the Xiaomi 14 Ultra screen: should I do it myself or use a technician?

There are two types of people: those who enjoy having a screwdriver in their hand and those who would rather let someone else do it while they enjoy a coffee. ☕ Both options are perfectly valid.

🔧 The DIY option: repair it yourself

If you have already opened a phone before, the Xiaomi 14 Ultra is a manageable challenge, although it requires patience and care. It has slightly curved edges and a rear cover that must be carefully removed, so it is best not to rush.

🏪 The easy option: take it to a repair shop

Not confident doing it yourself? Many repair shops will allow you to bring your own replacement part, so you only pay for the labour. Buy the screen here, take it to your trusted technician and you will soon have your Xiaomi 14U back.

How to replace the Xiaomi 14 Ultra screen step by step

If you have decided to do it yourself, here is a general guide. Read all the steps before starting and work on a clean, well-lit surface. 💡

1. Switch the phone off completely and remove the SIM tray.
2. Discharge any static electricity using an anti-static wrist strap or by touching an earthed metal surface.
3. Heat the rear cover with a heat gun or hairdryer, keeping it around 5 cm away and moving it continuously to soften the adhesive.
4. Using a suction cup and a pick, lift the rear cover gradually and work your way around the edges. Be careful with the camera module flex cable and any components that may be attached to the cover.
5. Remove the screws and protective shields covering the motherboard. Keep them organised so you do not mix them up during reassembly.
6. Disconnect the battery first. This is essential to avoid damaging any components.
7. Disconnect the screen flex cable from the motherboard.
8. Turn the phone over and heat around the screen edges. Carefully insert picks along the sides, especially around the curved areas.
9. Separate the damaged screen and carefully feed the flex cable through its opening.
10. Thoroughly clean away any adhesive residue from the frame using isopropyl alcohol.
11. Connect the new screen and the battery without applying adhesive yet, then switch the phone on to check the image and touchscreen. ✅
12. If everything works, switch it off, apply new adhesive, position the screen and press it down evenly.
13. Reinstall the shields, screws and rear cover with its adhesive.
14. Leave the phone under light pressure for a few hours so the adhesive can bond properly.

⚠️ Extra tip: after the replacement, you may need to register your fingerprint again in the security settings. This is normal after replacing the screen on many models.

Frequently asked questions about the Xiaomi 14 Ultra screen

Will it fit any Xiaomi 14?

No. This replacement part is only for the Xiaomi 14 Ultra (24031PN0DC / 24030PN60G). The Xiaomi 14 and Xiaomi 14 Pro have different screens and are not compatible. Don’t make that mistake! 🙅

The technical specs of Xiaomi 14 Ultra

• Brand: Xiaomi
• Xiaomi 14 Ultra Size: 161.4 x 75.3 x 9.2 mm.
• Release date: 2024, February 22.
• Weight: 219.8 / 224.4 / 229.5 g.
• Screen specs: LTPO AMOLED, 68B colors, 120Hz, 1920Hz PWM, Dolby Vision, HDR10+, 1000 nits , 3000 nits.
• Screen size: 6.73 inches, 108.9 cm2.