Complete screen for Vivo Y36

How can I easily change the Vivo Y36 5G screen

First, you need to have the right tools for this job. You need a heat source which will be used to separate the damaged screen from the phone. Also, you should have a guitar pick to perform the job of separating the Vivo Y36 5G screen by exerting precise force, keeping in mind that it must be neat. And also, you should have a cotton cloth.
On the other hand, the display you will receive will come very well packaged, so you need to remove it from the package very carefully. Once you have all the tools you need and the screen, I will guide you through everything you need to do.

1. Before starting, it is essential and imperative that you press the power button until it turns off.
2. Make sure you have no static electricity. For this, it is good to have an antistatic bracelet and wear shoes that dissipate static.
3. Now having the smartphone turned off, we will connect our hair dryer to be able to change the broken screen of the phone, which is attached with an adhesive. It is recommended to use hair dryers that do not exceed high temperatures, otherwise, you will burn the essential chips, and if you did not remove the battery, it could overheat and then swell. Now, use the pick to be able to separate the screen, maintain a constant and gentle impulse.
4. Finish separating the module with the suction cup (included in the kit that comes with the Vivo Y36 screen) and carefully separate it from the rest. Before removing it, pay attention to how the connector that connects to the motherboard is, so you do not destroy the board where you will place the Vivo Y36 screen.
5. Now, clean all the adhesive remnants well with a cloth and alcohol. You should not clean the residues with water, as water will corrode the boards.
6. Now you must assemble the new V2247, V2248. Check if it starts and works properly, both visually and the touch.

You have finished, you now have the new screen on your smartphone. Do not forget to put the battery back in and check all its functionality.

What is the price of the Vivo Y36 screen?

The total we mentioned above (25.90€), will only increase the price of the transfer. VAT is already included in the purchase. You can choose full shipping, or standard shipping which will have its delays. In both options, you can be confident that what you ordered will arrive in optimal condition.

Should I go to the original technical service

Of course, when the LCD was damaged you thought about this. We are so worried about this moment because we know that going to a specialist will cost us much more and it is not justified to pay so much. But stay calm, we offer you the ease of fixing it in your apartment and without wasting your money.

Can I change the screen for Vivo Y36 myself?

Our intention is focused on your convenience and being able to provide you with a solution to everyday life problems. Now, I will help you understand if your screen suffered a severe fall and if it is necessary to replace it, and if necessary, we have already listed how to fix it easily (with a gift). Without further ado, pay attention to all the steps and... get to work!

Original alternatives and recommendations for Vivo Y36

First of all, what you should do, is to put a silicone protector that adheres to the screen, and prevents it from scratches or scrapes. The thickness of the protector film is usually 0.3 to 0.5 mm and they act as a shield against any blow from a meter. The qualities vary, as does their cost, but it is still extremely low. And you can change them yourself easily whenever it has any scratch or is completely broken. In this way, only the glass will break and the module of your smartphone will be undamaged.
Also, we encourage you to put on a plastic case that reduces the impact of the fall avoiding further damage. And it protects the edges. One of the most used are those that have an edge that stands out above the module, so that when it hits the ground it does not hit.
Another suggestion, and that is viral right now, is the wallet-like case. Not only will we carry our smartphone with a decoration, but also, we prevent it from falling.

Diagnosing if the screen is broken

Before concluding that it is completely defective, we must know if it is the protector film or the Vivo Y36 screen that is damaged.
If the touch fails we will notice it when seeing the exterior cracked and yet, the display continues to work normally. But the LCD will become unusable if the Vivo Y36 stops working, that is, if only a section is displayed, vertical lines appear or nothing is shown at all. To finish confirming that we must replace it, go to settings. Then, to "Phone information" and press 7 times on "build number". This way the "developer options" are activated.
Inside this section, select "pointer location", and draw lines all over the screen. If they are not seen, it is assumed that there are problems and you have to replace it.