Complete screen for Realme C55

Changing Realme C55 screen

First, you need the right tools to be able to change your phone's screen. You'll need a heat source which will be used to remove the broken screen from the smartphone. Also, you'll need a guitar pick to separate the Realme C55 screen included in the tool kit and some kind of glue or adhesive tape that you can purchase on our website.
Moreover, the screen you'll buy will arrive very well secured, so you should remove it from the package very carefully. Once you have all the tools and the display, I'll show you everything you need to do.

1. Before starting, it's essential and important that you remove the battery.
2. Make sure you have no static electricity. A good way is to have an anti-static wristband and wear shoes that dissipate static electricity.
3. Now, we'll turn on our hair dryer to be able to remove the broken display from the phone, which is held in place with adhesive. It is recommended to use heat sources that do not exceed high temperatures, otherwise, you'll dissolve the essential boards, and if you didn't remove the battery, it could gain a lot of energy and then explode. Then, use the pick to separate the display, do it with a steady and gentle impulse.
4. Finish separating the LCD with the suction cup (included in the kit that comes with the Realme C55 screen) and carefully disconnect it from the motherboard. Before removing it, pay attention to how the connector connects to the main board, so you don't break the base where you will place the Realme C55 screen.
5. An important step, clean all the adhesive residues well with a gauze and alcohol. You should not clean the residues with water, as water will corrode the boards.
6. Now connect the new display to the motherboard and connect the cable that comes factory-installed on the device.
7. Now you just have to place and glue the new screen.

That's it, you have the new display on your smartphone. Don't forget to put the battery back in and test all its functionality.

What is the price of the Realme C55 screen?

The price is the one mentioned at the top (20.90€). Taxes are also included in the price. You just have to add the shipping cost you choose at the time of purchase.

Should I go to an official service center

It's very normal to feel apprehensive about something you've never done before, but remember that there are no secrets to this job. Many digital books and videos have been written on how to change the module of your smartphone.
In this post, we explain how to do it yourself with a minimal investment of 20.90€. Make sure to read it thoroughly, don't try to skip any paragraph because the success of your job depends on it. If you don't understand it, read it as many times as necessary. So the answer is: no, it's not necessary to send it to an official service. You can do it yourself!

How to tell if I have a damaged Realme C55 screen

Most accidents that all devices suffer can be concluded to be not serious. Generally, they just scratch the screen and do not suffer any other permanent damage. Even so, there are times when your phone falls in such a way that it permanently destroys the screen of our mobile and we can't see any damage at first glance, but even if it doesn't seem like it, that fall did cause problems to our smartphone. That's when you have to look at these very fundamental items to see if your smartphone's utility is still working.
If the touch starts to fail, we will notice when we see the exterior cracked and yet, the display still looks normal. But the screen will be shattered if the Realme C55 stops working, that is, if only a section is visible, horizontal lines appear, or nothing can be seen at all.

To finally confirm that we need to install another one, go to settings. Then, to "About phone" and tap 7 times on "build number". This will activate the "developer options".
Inside this section, select "pointer location", and draw lines across the entire area of the module. If these are not visible, it means that it is damaged and you need to replace it.