This screen is not compatible / does not have a fingerprint sensor.
OPPO Reno8 Lite screen replacement
We recommend that you watch videos on Youtube about the OPPO Reno8 Lite screen and the tools you need to repair the module.
Once we have the information and the package, it is time to proceed with the assembly very carefully. The instructions to follow are:
- First, turn off your phone and remove the battery.
- Now plug in our heat source to separate the broken screen from the phone, which is attached with an adhesive. We suggest using hair dryers that do not use very hot air, because otherwise, you will dissolve the essential boards. Now, use the pick to gradually peel off the screen, do it with constant and gradual force.
- When finished, be careful, because you will remove the broken display from the motherboard.
- After removing it, clean the surface well with the cloth to remove all the adhesive that remained. You can use liquids that were made for this purpose, do not use water because it will damage many buttons.
- The last step is to place the new screen for CPH2343. Check if it turns on and works properly, both the graphics and the touch.
You're done, you have a new display on your phone. Don't forget to place the battery and check all its performance.
What is the price of the OPPO Reno8 Lite screen?
The price is the one mentioned at the top (28.90€). Taxes are included in the price, so you don't have to do any calculations. Just add the shipping cost.
Can I change the OPPO Reno8 Lite screen myself?
Have you now got our screens? Now everything is in your hands. You need to be relaxed and fully focused on this task. Our intention is for you to save the labor costs. Do not be discouraged when you go through a situation like this. Keep in mind that you can do it if you stay calm.
How to know if you have a damaged screen
Before making sure it is completely broken, we need to check if it is the film protector or the touch that is defective.
If the touch fails, we will notice when the exterior is cracked but the screen continues to be seen. But the LCD will be damaged if the OPPO Reno8 Lite stops working, that is, if only a part is visible, horizontal lines appear or nothing can be done. To verify that we need to change it, go to settings. Then, to "About the phone" and click 7 times on "build number". This will give you access to the "developer options".
Inside this section, select "pointer location", and draw lines over the entire area of the module. If they are not drawn, it means that it has problems and you need to replace it.
