Complete screen for OPPO Find X5 Lite

• The touch screen.
• The display.
• A connection flex which joins to the motherboard.
• An integrated image controller IC.

To make the screen disassembly more pleasant, we include a set of tools, among them are levers, a pick, and tools to remove screws. You will use each tool in order to achieve a successful display repair.
The OPPO Find X5 Lite Screen and the tools will be sent to you in perfect condition due to the packaging we use, ensuring that no accessory we send you will break.

This screen is not compatible / does not have fingerprint recognition.

Quickly change the screen for OPPO Find X5 Lite

In this article, I will show you in a simple, intuitive, and reliable way, how to change the mobile phone screen in 4 steps. Before starting, make sure you know how your phone is made.
The first thing you should do is place the phone face down. Remove the back cover, the battery, and you will see some screws, take them out.
The second step is to carefully remove the screen Flex. Do it carefully as the Flex can be cut. To identify it, you will see that it is a small socket. With a small screwdriver, apply a little force and it disconnects by itself.
Third, you must remove the broken module, for this we will use two accessories:

• Heat: for this you can use a hair dryer, not exceeding 120°C.
• A plastic pick: apply pressure underneath the touch.

To conclude, place the screen (first remove any remaining adhesive) and connect the cables exactly the same way. Now all that remains is to put the screws and the back cover back on.

What is the price of this screen?

The price is as stated at the top (21.50€). VAT is already included in the price, you just have to add the shipping cost which will depend on how urgently you need the replacement.

Do I need to go to an official service center

Not at all, because we are going to teach you how to install it yourself with all the necessary care and you will see what tools are indispensable. This way you can safely change the module for the model CPH2371 and you will also be able to save.

Will I be able to fix the OPPO Find X5 Lite screen myself?

Now, I will show you how you can tell if your screen has any broken pixels and if it is necessary to replace it, and in that case, we have already indicated how to fix it in simple steps. Without further ado, focus on all the steps and... get to work!

Original OPPO Find X5 Lite recommendations

Now that you have your new display installed, you undoubtedly want to take care of it so the same thing doesn't happen again.
There are several accessories to protect your smartphone, the most commonly used are high-impact cases that protect the lower parts of your device.
Next are the tempered glass protectors that are installed with an adhesive they come with, they are super easy to install. They also withstand many impacts, they can crack sometimes, but the new display will not be damaged. A very interesting invention that we can acquire is the high-impact liquid, this liquid has a higher resistance to accidents and gets damaged less than the high-impact glass.

How to tell if the screen is broken

The large number of falls that all phones have, it could be said that they are not serious accidents. Generally, the screen cracks very little and does not have any other damage that affects the functioning of the same. However, there are times when our electronic device receives a quite severe blow and we cannot see any mark at first glance, but still, that fall did cause greater difficulties to your phone. That's when you should follow these essential items to check the functionality of your mobile.
If the touch fails, we will realize by noticing the exterior cracked but the screen continues to be displayed normally. But the screen will be unusable if the OPPO Find X5 Lite stops working, that is, if only a part is displayed, horizontal lines are shown or the screen does not turn on.

To verify that we need to repair it, go to settings. Then, to "About phone" and tap 7 times on "build number". This way the "developer options" are activated.
Inside this item, choose "pointer location", and draw lines all over the screen. If they are not seen, it is assumed that it is damaged and you have to change it.