Changing the iPhone X OLED Screen
Here I will explain in a simple and intuitive way how to replace the broken screen of the phone in a list of easy steps. But first, to start make sure you understand the features of your phone.
The first thing you should do is place the phone with the LCD facing down. Remove the back cover, the battery, and you will see some screws, remove them.
The second step is to disconnect the Flex cable of the screen. Do it carefully as the cable can break. With the plastic lever, apply pressure and it will come out by itself.
Now you must do the following: remove the broken screen, for this we will use two things:
- Heat: for this we will use a heat gun, which should not exceed 120°C. Apply it around the edges
- A plastic pick: exert pressure under the touch panel.
- Finally, place the screen (after cleaning any impurities) and connect the cables exactly the same way they were. Now just put the screws and the cover back on.
What is the price of the iPhone X OLED Screen?
The cost is indicated at the beginning (30.90€), only the price of shipping will be added. Taxes are already included in the purchase. You can choose fast shipping, or standard shipping which will have its delays. In both options, you can rest assured that what you have purchased will be in excellent condition.
What color variations does the screen have?
For now, we only have the color black for all Apple iPhone X models.
Do I need to go to the original iPhone service center?
Not at all, because we are going to teach you how to install it yourself with all the necessary care and I will reveal what tools are important to have. This way, you can change the display (model A1865, A1901, A1902, A190
• in a simple way and you will also be able to save a significant amount of your money.
Will I be able to replace this screen for Apple iPhone X?
Have you already purchased our screens? Now everything is in your hands. It is necessary to be calm and completely focused on this precise task.
Do not get discouraged at this time. Always keep in mind that you can do it if you assemble your phone calmly. This way, you won't break any important component of the phone that later will be much more expensive to repair or that it may be impossible to obtain what has been damaged.
Original Apple iPhone X options and advice
First of all, what you should do is apply a screen protector that sticks to the screen, and protects it from scratches or scrapes. The thickness of the silicone protector is usually 0.3 to 0.5 mm and its function is to act as a shield against any fall from a meter. This way only the protective film will break and your iPhone's display will continue without damage.
Also, we recommend putting on a case that cushions the impact of the fall reducing the chance that the screen shatters and protects the edges. One of the most used cases are those that have an edge that is a few millimeters above the touch panel, so that when it hits the ground it does not touch.
How to know if I need to change the screen
Before concluding that it is completely broken, we must check if it is the glass or the display that is faulty.
If the touch starts to fail, we will notice when seeing the exterior cracked but the LCD continues to work normally. But the display will be damaged if the Apple iPhone X stops working, that is, if only a part is visible, vertical lines appear, or nothing can be seen. To finish confirming that we need to replace it, go to settings. Then, to "Phone Information" and tap 7 times on "build number". This will activate the "developer options".
Within this item, select "pointer location", and outline over the entire screen. If these do not show up, it means that it is faulty and you need to replace it.
