This screen is not compatible with the fingerprint reader.
Quick change of screen for Xiaomi 13
In this article, I simply show you how to change the damaged screen of the mobile phone in just four steps. But before you start, make sure you know how your mobile is made.
The first thing you should do is place the mobile face down. You must open the back cover, the battery, and you will notice that there are some screws, remove them.
The second step is to disconnect the Flex cable of the screen. Do it carefully as the Flex can be damaged. To realize, you will see that it is a small socket. With the plastic lever, apply a little pressure and it will pop out by itself.
The third step is to separate the broken screen, for this we will need to use two tools:
- Heat: for this you can use a heat gun, not exceeding 120°C, or alternatively a hair dryer. Apply it all around the screen, not in the center as it can overheat and melt components.
- A plastic pick: apply pressure between the module and the housing.
To conclude, place the screen (first clean the impurities) and connect the cables as they were. Now all that remains is to put the screws and the back cover back on.
What is the price of the screen?
The price is specified above (37.99€). VAT is already included in the purchase. You just have to add the shipping cost which will depend on your needs at the time of purchase.
Should I go to the official Xiaomi service
It is normal to feel overwhelmed in front of something you have never done, however, do not forget that we help you to carry out this work. Many e-books and tutorials have been written on how to replace the screen of your Xiaomi 13 (2211133C).
On this page, we have shown you how to do it yourself for a minimal cost of 37.99€. Therefore, the answer is: no, it is not necessary to take it to an official service. You can do it!
Can I change this Xiaomi 13 screen myself?
Rest assured that you can! We have already explained the procedures that must be carried out quickly and efficiently so that your Xiaomi 13 works again. Now, we will reveal how to understand if the screen of your Xiaomi has stopped working.
If you follow the steps there will be no problems. You will be able to solve the issue without going to an official service and in a few steps.
How to know if you have a damaged screen
If you have a Xiaomi device and are considering whether you should change the screen, here are some signs to look out for: obvious cracks or breaks, dead pixels that do not display an image, display problems such as color lines or flickering, poor touch sensitivity, and backlight issues. These problems may indicate the need for a screen replacement.
To check that we need to repair it, go to settings. Then, to "About phone" and click 7 times on "build number". This will activate the "developer options".
Within this item, select "pointer location", and outline over the entire area of the module. If these are not visible, it means that it is damaged and you need to change it.
To protect your Xiaomi screen from falls or impacts, follow these recommendations: use a sturdy protective case, install a durable screen protector, avoid placing it next to hard objects, handle it with care and avoid wet hands, and be cautious when using it in high places. These measures can reduce the risk of damage, but do not guarantee complete protection. Be careful when handling your device and remember that being attentive is essential to avoid damage to the screen or the device in general.
