The replacement is an all-in-one integrated device. It includes:
- The touch (includes the protector).
- The display.
- A connection flex that joins to the motherboard.
- An integrated image controller IC.
- The backlight to set the brightness.
Also, so you don't lack any tools when changing it, we've added a toolkit, so you can do it yourself. This set includes:
- Screwdrivers.
- Different picks.
- Levers to pry off the screen.
- As well as a suction cup.
We recommend that you keep this set very well because it will be useful. The Samsung A41 Screen we provide is very well covered, so, they do not suffer any kind of surprises during shipping. We promise quality in our products.
This screen is not compatible/does not contain a fingerprint reader.
Changing Samsung A41 Screen
First, you need the right tools for this task. You need a heat source which will be used to separate the useless display from the smartphone. Also, you must have a pick to do the job of removing the Screen for Samsung A41 by applying precise force, keeping in mind that it must be neat. And also, you need a very soft cloth.
Moreover, the screen you will purchase will arrive very well stored, so you need to remove it from the packaging very carefully. Once you have all the tools and the display, I will show you everything you should do.
- Before starting, it is essential and also imperative that you turn off your Galaxy A41
- Make sure you have no static electricity. For this, you should wear an antistatic bracelet and use footwear that eliminates static electricity.
- Now with the smartphone turned off, we will turn on our hairdryer to be able to remove the broken screen from the phone, which is glued with an adhesive. We suggest using heat guns that do not exceed high temperatures, because otherwise, you will dissolve the important boards, and if you did not remove the power source, the battery could overheat and probably explode. Then, you need the pick to start peeling off the screen, use a constant and slow impulse.
- Finish separating the LCD with the suction cup (included in the toolkit) and carefully disconnect it from the housing. Before removing it, check well how is the connection that links to the motherboard, so you do not break the base where you will place the Samsung A41 Screen.
- When removing it, clean the surface very well with the soft cloth to be able to clean all the adhesive that has remained. You can use liquids that have been designed for this purpose, but if you do not have them, do not use water because you will damage most of the buttons, just use the velvet cloth.
- The last step is to assemble the new screen. Check if it turns on and works correctly, both visually and touch.
You have finished, you now have the new screen on your mobile. Do not forget to place the battery and check all its functionality.
How much does this screen cost?
The price we explained at the beginning (29.99€), just add the shipping cost. VAT is already included in the purchase.
Do I have to go to an official Samsung technical service
It is normal to feel overwhelmed if you have never done this, however, remember that there are no mysteries to this task. Many e-books and manuals have been published on how to replace the module of your Galaxy A41(SM-A415F/DSN, SM-A415F/DSM).
In this article, I will show you how to do it yourself with a minimal investment of 29.99€. Make sure to read it from top to bottom, do not try to skip any paragraph because that will depend on your effort being well done. If necessary, read it repeatedly. So the answer is: By no means take it to an official service. Cheer up!
Keep in mind that this screen does not have the holes for the upper sensors.
Can I repair this screen of the Samsung A41 Screen
Our goal will always be your satisfaction and in being able to help you with the problems of everyday life. Now, I will strive to help you know if your screen suffered a break and if you need to replace it, and if necessary, we have already shown you how to dismantle it easily (with a surprise). Now yes, pay close attention to all the steps and... get to work!
Different original tips for Samsung A41
The first thing you should do is put a silicone protector that sticks to the module, and protects it from scratches or marks. The thickness of it is usually 0.3 to 0.5 mm and they act as a shield against any blow from a meter. The qualities vary, and not to mention their cost, but it is still extremely cheap. And you can place them yourself easily whenever it has a scratch or has cracked. Thus, only the protector will break and the screen of your smartphone will be unharmed.
Also, we encourage you to use a case that reduces the impact of the fall preventing the screen from breaking. And it protects the edges. One of the most used cases are those that have an edge that is a few millimeters above the screen, so, when it hits the ground it does not touch.
Another recommendation, and that is viral at the moment, is the case with a strap. Not only can we carry our mobile with style, but also, we avoid it from falling.
Find out if you have a damaged screen
Most of the accidents that all mobiles suffer, it could be said that they are not accidents that completely damage your smartphone. Generally, they only scratch the screen and do not receive another permanent damage. Even so, there are times when our cell phone has a very serious accident and we do not see any damage at first glance, but still, it did cause greater difficulties to your smartphone. That's when you have to check these essential items to verify the functionality of your cell phone.
If the touch fails we will know by noticing the top part shattered and yet, the screen still looks normal. But the display will be damaged if the smartphone stops working, that is, if only half is seen, vertical lines appear or everything is dark. To finish confirming that we must repair it, go to settings. Then, to "About phone" and tap 7 times on "build number". This gives you access to the "developer options".
Inside this section, choose "pointer location", and draw lines all over the area of the module. If these are not represented, it means that it has problems and you must replace it.
